Users Guide

Configuring Network and Storage for Oracle RAC Database 35
Table 6-3. IP Address and Node Names
NOTE: Registering the private IP addresses with the DNS server is not required
because the private network IP addresses are not accessible from the public
network.
5 Repeat step 1 to step 4 on the remaining nodes.
6 Ensure that the cluster nodes can communicate with the public and
private networks.
a On node 1, open a command prompt window.
b At the command prompt, type:
ping <public_host_name>
ping <private_host_name>
where < public_host_name > and < private_host_name > are
the host names for the public and private network adapters in the
remaining node.
If the node’s network adapters do not respond to ping commands, check
your network configuration and then repeat this step.
NOTE: Virtual internet protocol (VIP) is configured later and cannot be pinged
at this point.
c Repeat step a through step b on the remaining nodes.
IP Address Node Name
155.16.170.1 rac1
155.16.170.2 rac2
10.10.10.1 rac1-priv
10.10.10.2 rac2-priv
155.16.170.201 rac1-vip
155.16.170.202 rac2-vip