Users Guide

Installing Oracle
®
RAC 10g R2 Using OCFS 11
9 In the Specify Network Interface Usage window, click Next .
10 In the Cluster Configuration Storage window, perform the following
steps for the Oracle Cluster Registry (OCR) disk:
a Locate the two 300 MB partitions that you created. For more
information on the procedure, see
Preparing the OCR and Voting
Disks for Clusterware
in Oracle Database on Microsoft Windows
Server x64 – Storage and Network Guide
available at
support.dell.com/manuals .
b Select the first partition and click Edit .
c In the Specify Disk Configuration window, select Place OCR
(Primary) on this partition
and click OK .
d Select the second partition and click Edit .
e In the Specify Disk Configuration window, select Place OCR
(Mirror) on this partition and click OK .
11 In the Cluster Configuration Storage window, perform the following
steps for the voting disk:
a Locate the three 250 MB partitions that you created. For more
information on the procedure, see
Preparing the OCR and Voting
Disks for Clusterware
in Oracle Database on Microsoft Windows
Server x64 – Storage and Network Guide
available at
support.dell.com/manuals .
b Select the first partition and click Edit .
c In the Specify Disk Configuration window, select Place Voting Disk
on this partition
and click OK .
d Repeat step b and step c on the remaining voting disk partitions.
12 In the Cluster Configuration Storage window, perform the following steps
for the database:
a Locate the partition that you created. For more information on the
procedure, see
Preparing the Database Disk and Flash Recovery Area
for Database Storage With OCFS
in Oracle Database on Microsoft
Windows Server x64 – Storage and Network Guide
available at
support.dell.com/manuals .
b Select the partition and click Edit .