Users Guide

Conguring the alert destination using the script le (Linux)

Prerequisites

• Ensure that Net-SNMP is installed on the system. For information on installing Net-SNMP, see Installing Net-SNMP (Linux only)

• Ensure that you have root privileges on the device.

The script le is supported only on devices running the following operating systems:

• Red Hat Enterprise Linux 5.5 (32-bit and 64-bit)

• Red Hat Enterprise Linux 5.7 (32-bit and 64-bit)

• Red Hat Enterprise Linux 5.8 (32-bit and 64-bit)

• Red Hat Enterprise Linux 5.9 (32-bit and 64-bit)

• Red Hat Enterprise Linux 5.10 (32-bit and 64-bit)

• Red Hat Enterprise Linux 5.11 (32-bit and 64-bit)

• Red Hat Enterprise Linux 6.1 (64-bit)

• Red Hat Enterprise Linux 6.2 (64-bit)

• Red Hat Enterprise Linux 6.3 (64-bit)

• Red Hat Enterprise Linux 6.4 (64-bit)

• Red Hat Enterprise Linux 6.5 (64-bit)

• Red Hat Enterprise Linux 6.7 (64-bit)

• Red Hat Enterprise Linux 6.8 (64-bit)

• Red Hat Enterprise Linux 7.0 (64-bit)

• Red Hat Enterprise Linux 7.1 (64-bit)

• Red Hat Enterprise Linux 7.2 (64-bit)

• SUSE Linux Enterprise Server 10 SP3 (32-bit and 64-bit)

• SUSE Linux Enterprise Server 10 SP4 (32-bit and 64-bit)

• SUSE Linux Enterprise Server 11 (64-bit)

• SUSE Linux Enterprise Server 11 SP1 (32-bit and 64-bit)

• SUSE Linux Enterprise Server 11 SP2 (64-bit)

• SUSE Linux Enterprise Server 11 SP3 (64-bit)

• SUSE Linux Enterprise Server 11 SP4 (64-bit)

• SUSE Linux Enterprise Server 12 (64-bit)

• SUSE Linux Enterprise Server 12 SP1 (64-bit)

• CentOS 7.0

• CentOS 6.0

• Oracle Linux 7.1

• Oracle Linux 6.7

• VMware ESX 4.1

Steps

1. On the server on which SupportAssist is installed, browse to the C:\Program Files\Dell\SupportAssist\scripts folder.

2. Copy the script le (LinuxSNMPCong.sh) located in the folder and paste the le at a desired location (for example, \root) on

the device.

3. Open the terminal window and log in as a user with root privileges.

4. Run the script le on the device using the following syntax: sh LinuxSNMPConfig.sh -d <IP address of the

server on which SupportAssist is installed>. For example, sh LinuxSNMPConfig.sh -d

10.10.10.10