Users Guide

Use different SupportAssist profile
Prerequisites
You must be logged in as an administrator.
Steps
1. On the top-right corner of the SupportAssist user interface, click the username and click Use a different profile.
2. Click Continue.
The current profile is deactivated, access to the saved contact information and shipping details is removed, and the Home
page is displayed. A link to create a profile is displayed on the top-right corner of the SupportAssist user interface. See
Create SupportAssist profile.
Configure Internet settings
Prerequisites
You must be logged in as an administrator.
About this task
Your PC must be connected to an active Internet connection to experience the automated support capabilities of SupportAssist.
You can configure SupportAssist to connect to the Internet directly or through a proxy server.
Steps
1. On the top-right corner of the SupportAssist user interface, click the settings icon, click Settings, and then click Internet.
2. If SupportAssist can directly connect to the Internet, select Connect directly.
3. If SupportAssist must connect to the Internet using a proxy network, perform the following steps:
a. Select Connect using proxy.
The proxy settings fields are displayed.
b. Enter the address, port number, username, and password details.
NOTE: You can enter a maximum of five digits for the port number.
4. Click Save.
The Internet settings are configured and the Home page is displayed.
Schedule automatic scans and optimizations
Prerequisites
You must be logged in as an administrator.
About this task
By default, SupportAssist scans your PC to detect hardware issues, driver updates, and the required PC optimizations. The
default frequency of the scans depends on your PC service plan. If an urgent driver update, hardware issue, or a virus or
malware is detected during the scan, a notification is displayed. The type of notification depends on the operating system
that is installed on your PC. If your PC has an active ProSupport Plus or Premium Support Plus service plan, SupportAssist
automatically optimizes your PC after the scan. You can select the preferred time, frequency, and day when you want
SupportAssist to scan your PC.
Steps
1. On the top-right corner of the SupportAssist user interface, click the settings icon, click Settings, and then click Schedule
scans and Optimizations.
2. Ensure that the Turn on automatic system scans and optimizations check box is selected.
14
Getting started with SupportAssist for Home PCs