Users Guide
Table Of Contents
- SupportAssist for Home PCs Version 3.9 User’s Guide
- Contents
- Introduction
- بدء استخدام SupportAssist لأجهزة الكمبيوتر المنزلية
- Minimum PC requirements
- Install SupportAssist for Home PCs
- SupportAssist user interface
- Change language setting
- Create SupportAssist profile
- تحديث معلومات جهة الاتصال والشحن
- Use different SupportAssist profile
- تكوين إعدادات الإنترنت
- Schedule automatic scans and optimizations
- Manually upgrade SupportAssist
- الإعلامات
- Uninstall SupportAssist
- System reset and repair overview
- Dell Migrate overview
- Drivers and downloads overview
- Scanning PC hardware
- Optimizing your PC
- Virtual assistant overview
- إنشاء طلب دعم
- Troubleshooting overview
- History overview
- Getting support
- Frequently asked questions
- SupportAssist for Home PCs resources
- Contacting Dell
Repair your PC
About this task
System repair feature enables you to diagnose and troubleshoot common issues that may occur before your PC boots to the
operating system. It checks and fixes the partition table, start-up file, and the health of the Windows operating system.
Steps
1. Open SupportAssist and go to Troubleshooting > Restore my PC with System Repair, and then click Launch System
Repair.
2. Click Yes, restart.
The PC restarts , and the SupportAssist OS Recovery user interface is displayed.
● If the issue is fixed successfully, the Everything's back to normal status is displayed. Click DONE.
● If the issue cannot be fixed or if the repair is unsuccessful, an error message is displayed. Click RESET OPTIONS to
reset the operating system of your PC. See System reset and repair overview on page 20.
22 System reset and repair overview