Deployment Guide

About this task
For SupportAssist to function normally and as expected, SupportAssist must be connected to Dell. Run the self-diagnosis test
on any of the PCs after deployment to determine if SupportAssist is successfully connected to Dell and is working as expected.
Steps
1. Access the PC on which you want to perform the self-diagnosis test.
2. Click Start to open the Programs menu.
3. Find Command Prompt and click Run as administrator.
The Command Prompt window is displayed.
4. Change the directory to \Program Files 64\Dell\SupportAssistBusinessClient\bin.
5. Type SelfDiagnosis.exe and press Enter.
Depending on the test result, one of the following messages is displayed for every test:
Available or ReachableSupportAssist is successfully connected to Dell and is working as expected.
UnavailableSupportAssist is not connected to Dell or is not working as expected. Perform one of the following steps:
Reboot the PC and retry performing the self-diagnosis test again.
Check the proxy, firewall, and network configurations in your environment, and retry performing the self-diagnosis
test.
After performing the above tests, if SupportAssist is not connected to Dell or is not working as expected, contact Dell
technical support for assistance.
Configuring and deploying SupportAssist 15