Manualshelf

Users Guide

ManualsBrandsDell ManualsAnalyticsSupportAssist Enterprise Application 2.x
211212213214215216217218219220
Table Of Contents
Table 82. Error code appendix (continued)
Error code Error message Possible resolution
SA-30419 SupportAssist Enterprise is unable to set up the
Remote Collector Remote Collector_name because
the Remote Collector installer could not be copied to
the remote system.
Ensure that the remote system is reachable. Verify the
credentials of the remote system and then retry the
operation.
SA-30420 SupportAssist Enterprise is unable to set up the
Remote Collector Remote Collector_name because
the Remote Collector installation on the remote
system was unsuccessful.
Ensure that the remote system is compatible with the
hardware and software requirements for setting up a
Remote Collector.
SA-30421 SupportAssist Enterprise is unable to set up the
Remote Collector Remote Collector_name because
the Remote Collector installation was not successful.
Ensure that the remote system is compatible with the
hardware and software requirements for setting up a
Remote Collector.
SA-30422 SupportAssist Enterprise is unable to set up the
Remote Collector Remote Collector_name because
the installation of the Remote Collector was
unsuccessful.
Reinstall SupportAssist Enterprise and then retry the
operation.
SA-30423 SupportAssist Enterprise is unable to set up the
Remote Collector Remote Collector_name because
the Remote Collector configuration was unsuccessful.
Reinstall SupportAssist Enterprise and then retry the
operation.
SA-30424 SupportAssist Enterprise is unable to set up the
Remote Collector Remote Collector_name because
the remote system does not have sufficient free
hard-drive space.
Ensure that the remote system has at least 500 MB of
free hard-drive space.
SA-30425 SupportAssist Enterprise is unable to set up the
Remote Collector Remote Collector_name because
SupportAssist Enterprise is already installed on the
remote system.
Uninstall SupportAssist Enterprise from the remote
system and then retry the operation.
SA-30426 SupportAssist Enterprise is unable to set up the
Remote Collector Remote Collector_name because
the IP address or hostname that has been provided is
of the local system.
Provide the correct IP address or hostname of a
remote system and retry the operation.
SA-30427 SupportAssist Enterprise is unable to set up the
Remote Collector Remote Collector_name because
the remote system is not reachable.
Ensure that the remote system is reachable and then
retry the operation.
SA-30428 SupportAssist Enterprise is unable to set up the
Remote Collector Remote Collector_name because
the Remote Collector is not supported on a non-
Windows operating system.
Ensure you provide the details of a remote system
that is running a Windows operating system and then
retry the operation.
SA-30428 SupportAssist Enterprise is unable to set up the
Remote Collector Remote Collector_name because
setting up a Remote Collector on a Windows system
is not supported.
Ensure that the remote system has Linux operating
system installed and retry the operation.
SA-30429 SupportAssist Enterprise is unable to update
the details of the Remote Collector Remote
Collector_name because the provided IP address
range IP address_range overlaps with the IP address
range of the same Remote Collector Remote
Collector_name.
Provide a mutually exclusive IP address range and
retry.
SA-30430 SupportAssist Enterprise is unable to update
the details of the Remote Collector Remote
Collector_name because the credentials of the
Remote Collector are incorrect.
Verify the credentials of the Remote Collector and
retry the operation.
220 Error code appendix