Reference Guide

SupportAssist Enterprise
52 REST API Guide – SupportAssist Enterprise
Parameters in the JSON schema
Parameter
Description
Additional details
id
Identifier for the discovery rule.
This parameter is required to run
the discovery rule.
ruleName
Name of the discovery rule.
credProfileId
Identifier for the credential profile.
deepDiscoveryEnabled
Specifies whether deep discovery is to
be performed.
This parameter is required for
deep discovery.
enableMonitoring
Specifies whether monitoring is to be
enabled for the discovered devices.
installAgent
Specifies whether OMSA must be
installed on the discovered servers.
configureSNMP
Specifies whether SNMP settings (alert
forwarding) must be configured on the
devices.
runStatus
Running status of the rule.
range
Array of range and subnet
subnet
Array of IP address ranges and subnet.
isRecurring
Specifies whether the rule should be run
periodically.
recurrCronString
Cron string if the rule is set to recur.
uiDeviceType
List of device type as specified in the
GUI.
uiDeviceSubType
List of device subtype.
ruleId
Identifier for the rule.
lastRunDate
Date in UTC in milliseconds.
typeSelected
Specifies whether IP address range or
device names are provided for discovery.
devices
Used to provide comma-separated IP
addresses.
recurring
Specifies whether the rule is set to recur.