Users Guide

If the device is a member of a Windows domain, you must provide the user name in the [Domain\Username] format. For
example, MyDomain\MyUsername. You can also use a period [ . ] to indicate the local domain. For
example, .\Administrator.
Example of a Linux user name: root
The Discovering Device page is displayed until SupportAssist Enterprise identifies the device.
If the device is discovered successfully, the Assign Device Group (Optional) page is displayed. Otherwise, an appropriate
error message is displayed.
9. If desired, from the Assign Other Group list, select a device group to which you want to assign the device.
If you do not select a device group, the device is assigned to the Default device group. For information on the Default
device group, see Predefined device groups.
10. Click Finish.
The device is added to the device inventory and the Summary page is displayed.
11. Click OK to close the Add Single Device wizard.
CAUTION: If the SNMP settings of the device is not configured and OMSA is not installed on the device,
SupportAssist Enterprise cannot monitor hardware issues that may occur on the device.
NOTE: Installation of OMSA is not supported on devices running CentOS, Oracle Virtual Machine, and Oracle Enterprise
Linux. When you add these devices with the Device Type as Server / Hypervisor, SupportAssist Enterprise can only
collect and upload system information. To allow SupportAssist Enterprise to monitor these devices for hardware issues,
add these devices by selecting the Device Type as iDRAC. For more information on adding an iDRAC, see Adding an
iDRAC on page 41.
The device is added to the device inventory with an appropriate status:
● When SupportAssist Enterprise is configuring the SNMP settings, the device displays a
Configuring SNMP
status.
● When SupportAssist Enterprise is installing or upgrading OMSA, the device displays an
Installing OMSA status.
After the installation of OMSA and configuration of SNMP settings are completed, the device status changes to
OK. If
an issue occurs during the configuration of SNMP or OMSA installation, the device displays an appropriate status in the
Devices page.
NOTE: If the device displays an error status, click the error link to see a description of the issue and the possible
resolution steps. To retry the OMSA installation or SNMP configuration, you can use the More Tasks list available on
the device overview pane.
Next steps
(Optional) You can also add the server in SupportAssist Enterprise by using the iDRAC details. In this scenario, SupportAssist
Enterprise automatically correlates the alerts and collection of system information from both the operating system and the
iDRAC. For instructions to add an iDRAC, see Adding an iDRAC on page 41. For more information on how SupportAssist
Enterprise correlates device information, see Device correlation on page 143.
If a message is displayed stating that the device is added to the Staging group:
1. Ensure that all prerequisites for adding the device are met.
2. Revalidate the device. See Revalidating a device on page 56.
Related references
Add Single Device on page 176
40
Adding devices