Users Guide

ManualsBrandsDell ManualsAnalyticsSupportAssist Enterprise 1.x

131

132

133

134

135

136

137

138

139

140

Table Of Contents

SupportAssist Enterprise Version 1.1 User's Guide
Overview
- What is new in this release
- Overview of supported device types
- How SupportAssist Enterprise works
- SupportAssist Enterprise capabilities available with Dell service contracts
- System information collected by SupportAssist Enterprise
Getting started with SupportAssist Enterprise
- Setting up SupportAssist Enterprise for the local system
- Setting up SupportAssist Enterprise for remote devices
- Evaluating SupportAssist Enterprise
- Downloading the SupportAssist Enterprise installation package
- Installing, Upgrading, or Migrating to SupportAssist Enterprise
- Minimum requirements for installing and using SupportAssist Enterprise
- Installing SupportAssist Enterprise
- Upgrading SupportAssist Enterprise
  - Upgrading SupportAssist Enterprise by using the SupportAssist Enterprise installation package
  - Upgrading SupportAssist Enterprise by using the OpenManage Essentials installer package
- Migrating to SupportAssist Enterprise
- Using SupportAssist Enterprise without registration
- Registering SupportAssist Enterprise
- Setting up an SELinux enabled system to receive alerts
- Opening the SupportAssist Enterprise user interface
- Logging in to SupportAssist Enterprise
- Logging out of SupportAssist Enterprise
Adding devices
- Device types and applicable devices
- Adding a single device
- Importing multiple devices
- Exporting details of devices that were not imported
- Revalidating a device
Viewing cases and devices
- Viewing all support cases
- Viewing support cases for a specific device
- Case management options
- Viewing the device inventory
- Viewing the device overview pane
- Refining the displayed data
- Filtering the displayed data
- Clearing the data filter
- Sorting the displayed data
Device grouping
- Predefined device groups
- Viewing device groups
- Creating a device group
- Managing devices in a device group
- Managing the credentials of a device group
- Viewing and updating the contact information of a device group
- Editing device group details
- Deleting a device group
Using Extensions
- Types of extensions
- Support for setting up adapter or Remote Collector
- Getting started with inventorying devices managed by OpenManage Essentials or Microsoft System Center Operations Manager
- Adapters
- Remote Collectors
Managing device credentials
- Editing device credentials
- Account Credentials
- Credential Profiles
Maintaining SupportAssist Enterprise capability
- Enabling or disabling monitoring of a device
- Installing or upgrading OMSA by using SupportAssist Enterprise
- Configuring SNMP settings by using SupportAssist Enterprise
- Viewing and updating the contact information
- Configuring proxy server settings
- Connectivity test
  - Viewing the connectivity status
  - Performing the connectivity test
- Testing the case creation capability
- Clearing the System Event Log (SEL)
- Automatic update
  - Enabling or disabling automatic updates
- Deleting a device
- Opting in or opting out from ProSupport Plus recommendation report emails
Configuring email notifications
- Configuring email notification settings
- Configuring SMTP server settings
- Types of email notifications
Configuring collection settings
- Prerequisites for collecting system information
- Enabling or disabling the automatic collection of system information on case creation
- Enabling or disabling the periodic collection of system information from all devices
- Enabling or disabling the collection of identity information
- Enabling or disabling the collection of software information and the system log
- Enabling or disabling the automatic upload of collections
Viewing collections
- Viewing a collection from the Devices page
- Viewing a collection from the Collections page
- Refining collections based on a date range
- Configuration Viewer
  - Data views
  - Log types
- Items reported in periodic collections from servers
- Downloading and viewing a multiple device collection
- Multiple device configuration viewer
Using SupportAssist Enterprise to collect and send system information
- Setting up SupportAssist Enterprise for collecting and sending system information
- Starting the collection of system information from a single device
- Starting the collection of system information from multiple devices
- Uploading a collection
- Uploading a collection from a disconnected site
Understanding maintenance mode
- Enabling or disabling global-level maintenance mode
- Enabling or disabling device-level maintenance mode
SupportAssist Enterprise user groups
- SupportAssist Enterprise functions and user privileges
- Granting elevated or administrative privileges to users
- Adding users to the SupportAssist Enterprise user groups (Windows)
- Adding users to the SupportAssist Enterprise user groups (Linux)
Manually configuring SNMP settings
- Manually configuring the alert destination of a server
- Manually configuring the alert destination of iDRAC by using the web interface
- Manually configuring the alert destination of a chassis by using the web interface
- Manually configuring the alert destination of a networking device
Other useful information
- Monitoring servers for hardware issues
- Support for automatically installing or upgrading OMSA
- Support for automatically configuring SNMP settings
- Device correlation
- Detection of hardware issues in attached storage devices
- Support for Dell OEM servers
- Installing Net-SNMP (Linux only)
- Configuring sudo access for SupportAssist Enterprise (Linux)
- Ensuring successful communication between the SupportAssist Enterprise application and the SupportAssist server
- Accessing the SupportAssist Enterprise application logs
- Event storm handling
- Accessing the context-sensitive help
- Viewing SupportAssist Enterprise product information
- Uninstalling SupportAssist Enterprise
- Identifying the generation of a Dell PowerEdge server
Troubleshooting
- Installing SupportAssist Enterprise
- SupportAssist Enterprise registration
- Opening the SupportAssist Enterprise user interface
- Logging in to SupportAssist Enterprise
- Unable to add device
- Unable to add adapter
- Unable to add Remote Collector
- Disconnected
- Importing multiple devices
- OMSA not installed
- SNMP not configured
- New version of OMSA available
- Unable to configure SNMP
- Unable to verify SNMP configuration
- Unable to install OMSA
- Unable to verify OMSA version
- OMSA not supported
- Unable to reach device
- Unable to gather system information
- Insufficient storage space to gather system information
- Unable to export collection
- Unable to send system information
- Authentication failed
- Clearing System Event Log failed
  - Clearing the System Event Log by using iDRAC
  - Clearing the System Event Log by using OMSA
- Maintenance mode
- Auto update
- Unable to edit device credentials
- Automatic case creation
- Scheduled tasks
- SupportAssist Enterprise services
  - Verifying the status of SupportAssist Enterprise services (Windows)
  - Verifying the status of SupportAssist Enterprise services (Linux)
- Other services
- Security
SupportAssist Enterprise user interface
- SupportAssist Enterprise Registration Wizard
- Login page
- Cases page
- Devices page
- Device Groups page
- Manage Account Credentials
  - Add Account Credentials
  - Edit Account Credentials
- Manage Credential Profiles
  - Add Credential Profile
  - Edit Credential Profile
- Collections page
  - Collection overview pane
- Extensions
  - Adapters
  - Remote Collectors
    - Set Up Remote Collector
    - Remote Collector overview pane
- Settings
- Network Connectivity Test
- SupportAssist Enterprise test
Error code appendix
Related documents and resources
- Accessing documents from the Dell EMC support site
- Contacting Dell

Manually configuring the alert destination of a server (Linux)

Perform the following steps to manually configure the alert destination of a server running Linux:

Steps

1. Run the command rpm -qa | grep snmp, and ensure that the net-snmp package is installed.

2. Run cd /etc/snmp to navigate to the snmp directory.

3. Open snmpd.conf in the VI editor (vi snmpd.conf).

4. Search snmpd.conf for # group context sec.model sec.level prefix read write notif and ensure that the values for

fields read, write, and notif are set to all.

5. At the end of the snmpd.conf file, just before Further Information, add an entry in the following format: Trapsink <IP

address of the server where SupportAssist Enterprise is installed> <community string> For

example, trapsink 10.94.174.190 public.

6. Restart the SNMP services (service snmpd restart).

Related concepts

Manually configuring the alert destination of a server on page 136

Manually configuring the alert destination of iDRAC

by using the web interface

Perform the following steps to manually configure the alert destination of an iDRAC:

Steps

1. Log in to the iDRAC web interface.

2. Go to Overview > Server > Alerts.

3. In the Alerts section, make sure that the Enabled option is selected.

4. In the Alerts Filter section, make sure that the following options are selected:

● System Health

● Storage

● Configuration

● Audit

● Updates

● Warning

● Critical

5. In the Alerts and Remote System Log Configuration section, make sure that all fields in the SNMP Trap column are

selected.

6. Click SNMP and Email Settings.

7. In the IP Destination List section, select the State option to enable the alert destination field.

You can specify up to eight destination addresses. For more information about the options, see the iDRAC Online Help.

8. In the Destination Address field, type the IP address of the server where SupportAssist Enterprise is installed.

9. Type the iDRAC SNMP community string (for example, public) and the SNMP alert port number (for example, 162) in the

appropriate fields.

For more information about the options, see iDRAC Online Help.

NOTE:

The community string value indicates the community string to be used in a Simple Network Management

Protocol (SNMP) alert trap sent from iDRAC. Ensure that the destination community string is the same as the iDRAC

community string. The default community string is Public.

10. Click Apply.

The alert destination is configured.

11. In the SNMP Trap Format section, make sure that either SNMP v1 or SNMP v2 is selected, and click Apply.

Manually configuring SNMP settings

139