Users Guide

Table 40. Error code appendix (continued)
Error code Error message Possible resolution
SA-0004 SupportAssist Enterprise is unable to import devices
because the .csv file is not available at the specified
location.
Ensure that the .csv file is available at the specified
location and then retry the operation.
SA-0006 SupportAssist Enterprise is unable to import devices
because the .csv file is not valid.
Ensure that the .csv file is valid and then retry the
operation.
SA-0007 SupportAssist Enterprise is unable to import devices
because the imported file does not contain a valid
header.
Ensure that the system running SupportAssist
Enterprise and the imported file contains a valid
header.
SA-0008 The device import operation is canceled. Not applicable.
SA-0009 SupportAssist Enterprise is unable to import one or
more devices because the credentials of the devices
were not included in the .csv file.
Ensure that the credentials of the devices are
included in the .csv file and then retry the operation.
SA-0011 SupportAssist Enterprise is unable to import devices
because the .csv file exists.
Delete the .csv file available at
the temporary location: C:\Users\<User
Name>\AppData\Local\temp and then retry the
operation.
SA-0012 SupportAssist Enterprise is unable to add the devices
because the entered host name or IP address, and
device type are incorrect.
Retry adding the device with the correct host name or
IP address, and device type.
SA-0005 SupportAssist Enterprise is unable to add the device
name because an attempt to connect to the device is
unsuccessful.
Ensure that both the system running SupportAssist
Enterprise and the device you are trying to add are
connected to the network, and then retry adding the
device.
SA-0010 SupportAssist Enterprise is unable to add the device
name because the entered host name or IP address is
incorrect.
Retry adding the device with the correct host name or
IP address.
SA-0015 SupportAssist Enterprise is unable to add the device
name because an unknown error occurred while
discovering the device.
Verify the following and then retry adding the device:
● Ensure that the device is supported by
SupportAssist Enterprise. For the list of supported
device models, see the Dell EMC SupportAssist
Enterprise Version 1.0 Support Matrix at https://
www.dell.com/serviceabilitytools.
● Ensure that the user account has administrator/
root privileges.
SA-0020 SupportAssist Enterprise is unable to add the device
name because the device is already added.
Not applicable.
SA-0025 SupportAssist Enterprise is unable to add the device
name because of an unknown error.
Verify if the device is supported by SupportAssist
Enterprise. For the list of supported device
models, see the Dell EMC SupportAssist Enterprise
Version 1.0 Support Matrix at https://www.dell.com/
serviceabilitytools. If the problem persists, contact
Dell Technical Support for assistance.
SA-0030 SupportAssist Enterprise is unable to add the device
name because the User Name or Password is
incorrect.
Verify the device information, ensure that the user
account has administrator/root privileges, and then
retry adding the device. If the problem persists,
contact your network administrator for assistance.
SA-0035 SupportAssist Enterprise is unable to add the device
name because the enable password is not provided.
Enter the enable password and then retry adding the
device.
SA-0040 SupportAssist Enterprise is unable to add the device
name because the Display Name is already in use by
another device.
Retry adding the device with any other Display Name.
Error code appendix 157