Setup Guide

2. From the Tasks list, select Install / Upgrade OMSA.
The Status column displays the status of the OMSA installation or upgrade.
Configuración de los valores de SNMP del sistema local
Se requiere la configuración de los valores de SNMP para supervisar los problemas de hardware que puedan producirse en el
sistema local.
Requisitos previos
Debe haber iniciado sesión en SupportAssist Enterprise con privilegios elevados. Para obtener información sobre los privilegios
de usuario de SupportAssist Enterprise, consulte SupportAssist Enterprise user groups (Grupos de usuarios de SupportAssist
Enterprise).
Pasos
1. En la página Dispositivos, seleccione el sistema local.
El panel Descripción general del dispositivo se muestra en el lado derecho de la página Dispositivos.
2. En la lista Tareas, seleccione Configurar SNMP.
La columna Estado muestra el estado de la configuración de SNMP.
Enabling monitoring of the local system
Enabling monitoring allows SupportAssist Enterprise to detect hardware issues that may occur on the local system.
Prerequisites
You must have completed the registration of SupportAssist Enterprise. See Registering SupportAssist Enterprise.
Steps
1. Click Devices.
The Devices page is displayed.
2. Select the local system.
The device overview pane is displayed at the right side of the Devices page.
3. In Monitoring, select Enable.
Setting up SupportAssist Enterprise for a remote
device
To set up SupportAssist Enterprise for monitoring or collecting system information from a remote device, add the remote device
in SupportAssist Enterprise.
Prerequisites
● You must be logged in to SupportAssist Enterprise with elevated privileges. For information on the SupportAssist Enterprise
user privileges, see SupportAssist Enterprise user groups.
● The remote device must be reachable from the local system.
● You must have completed the steps listed in Setting up SupportAssist Enterprise for the local system.
About this task
You can perform the following steps to add a remote server in SupportAssist Enterprise.
NOTE:
You can also add a supported storage, networking, or chassis device in SupportAssist Enterprise. For detailed
information on adding devices individually based on the device type, see the Dell EMC SupportAssist Enterprise Version 1.0
User's Guide at Dell.com/ServiceabilityTools.
6 Getting started with SupportAssist Enterprise