Support Matrix

Table 38. Network port requirements on remote devices (continued)
Device Type Port Usage
iDRAC 443 For Secure Socket Layer (SSL) and WS-Man communication
161 For forwarding alerts (SNMP traps) to the local system
623 For IPMI communication with iDRACs that are present in a Microsoft Azure Stack
environment
Storage PS
Series or
EqualLogic
22 For adding the device and to collect system information
161 For forwarding alerts (SNMP traps) to the local system
Storage MD
Series or
PowerVault
2463 For adding the device and to collect system information
Storage SC
Series or
Compellent
443 For adding the device and to collect system information
Fluid File System
(FluidFS)
22 and 44421 For adding the device and to collect system information
Networking 22 For adding the device and to collect system information
161 For forwarding alerts (SNMP traps) to the local system
Chassis 22 For adding the device and to collect system information
161 For forwarding alerts (SNMP traps) to the local system
Software 22 For adding a device running HIT Kit for VMware and to collect system information
443 For adding a device running VMware vCenter and to collect system information
135 For adding a device running SCVMM and to collect system information
135 For adding a device running SAN HQ and to collect system information
Solution 443 For adding a Web-Scale Converged Appliance and to collect system information
Minimum requirements for setting up a Remote
Collector
The following sections describe the minimum hardware and networking requirements for setting up a Remote Collector in
SupportAssist Enterprise.
Hardware requirements
The following table provides a summary of the minimum hardware requirements on the server where the Remote Collector is set
up.
Table 39. Hardware requirements
Requirement Processor Installed memory (RAM) Hard drive (free space)
For collection of system
information from a single
device
1 core 4 GB 1 GB
For collection of system
information from up to 20
devices
2 cores 4 GB 4 GB
Overview 31