Users Guide

6. Click Login.
The WinSCP window is displayed with the directory structure of the local and remote systems. You can securely drag files
between the local and remote system.
Useful commands
This section provides the Linux commands you can use to start, stop, or restart OMSA and the network service. At the terminal
command prompt, type the commands listed in the following tables to perform the required functions.
NOTE: You can run these commands using the root privileges.
Table 2. OMSA service commands
Command Description
srvadmin-services.sh start
Start the OMSA service.
srvadmin-services.sh stop
Stop the OMSA service.
srvadmin-services.sh restart
Restart the OMSA service.
srvadmin-services.sh status
Status of the OMSA service.
Table 3. Network service commands
Command Description
service network start
Start the network service.
service network stop
Stop the network service.
service network restart
Restart the network service.
Using Linux-based tools and utilities 21