SETUP GUIDE
SETUP GUIDE Model PP31L
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. If you purchased a Dell™ n Series computer, any references in this document to Microsoft® Windows® operating systems are not applicable.
Contents Setting Up Your Studio Laptop ����������������������5 Media Controls ���������������������������������������������� 27 Before Setting Up Your Studio Laptop ���������� 5 Removing and Replacing the Battery ���������� 28 Connecting the AC Adapter �������������������������� 6 Using the Optical Disc Drive ������������������������ 29 Connecting the Network Cable (optional) ���������������������������������������������������������� 7 Turning on Your Studio Laptop ������������������������ 8 Usin
Contents Restoring Your Operating System ������������43 Basic Specifications ����������������������������������56 System Restore ���������������������������������������������� 43 Appendix ������������������������������������������������������67 Dell Factory Image Restore �������������������������� 44 Macrovision Product Notice ������������������������ 67 Operating System Reinstallation ������������������ 46 Getting Help ��������������������������������������������������48 Technical Support and C
Setting Up Your Studio Laptop This section provides information about setting up your Studio 1737 laptop and connecting peripherals. Before Setting Up Your Studio Laptop When positioning your computer, ensure that you allow easy access to a power source, adequate ventilation, and a level surface to place your computer. Restricting airflow around your Studio computer may cause it to overheat. To prevent overheating ensure that you leave at least 10.2 cm (4 in) at the back of the computer and a minimum of 5.
Setting Up Your Studio Laptop Connecting the AC Adapter Connect the AC adapter to the computer and then plug it into a wall outlet or surge protector. CAUTION: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to a power strip or electrical outlet may cause fire or equipment damage.
Setting Up Your Studio Laptop Connecting the Network Cable (optional) To use a wired network connection, plug in the network cable.
Setting Up Your Studio Laptop Turning on Your Studio Laptop 8
Setting Up Your Studio Laptop Using the Wireless Switch To use wireless connections, make sure the wireless switch is in the “On” position. To turn on the wireless switch, slide it from the rear to the front of the computer until it clicks into place. - Off - On Windows Vista Setup ® Your Dell computer is preconfigured with Windows Vista. To set up Windows Vista for the first time, follow the instructions on the screen. These steps are mandatory and may take up to 15 minutes to complete.
Setting Up Your Studio Laptop Connecting to the Internet (Optional) Setting Up a Wireless Connection NOTE: ISPs (Internet Service Providers) and ISP offerings vary by country. To connect to the Internet, you need an external modem or network connection and an Internet service provider (ISP). NOTE: If an external USB modem or WLAN adapter is not a part of your original order, you can purchase one from the Dell website at www.dell.com.
Setting Up Your Studio Laptop 1. Save and close any open files, and exit any open programs. Before you can use your wireless Internet connection, you need to connect to your wireless router. To set up your connection to a wireless router: 1. Save and close any open files, and exit any open programs. 2. Click Start → Connect To. 3. Follow the instructions on the screen to complete the setup.
Using Your Studio Laptop Your Studio 1737 has several indicators, buttons, and features that provide information at-aglance and time-saving shortcuts for common tasks. 1 WiFi status light – Turns on when wireless networking is enabled. See “wireless on/off switch” on page 22 to quickly turn all wireless communication on and off.
Using Your Studio Laptop 2 Bluetooth® status light (optional) – Turns on when a card with Bluetooth wireless technology is enabled. NOTE: The card with Bluetooth wireless technology is an optional feature. To turn off Bluetooth wireless, right-click the bluetooth icon in the notification area of your desktop, and click Turn Bluetooth Adapter Off or see “wireless on/off switch” on page 22. 3 Hard drive activity light – Turns on when the computer reads or writes data.
Using Your Studio Laptop Right Side Features 6 5 4 3 2 1 14
Using Your Studio Laptop NOTE: Do not uses non-standard-size or shape discs (including mini-CDs and miniDVDs) or you will damage the drive. 3 Optical Drive – Supports only standardsize and shape (12 cm) CDs, and DVDs. Ensure that the side with print or writing is facing upward when inserting discs. For more information, see the Dell Technology Guide. 1 Audio Out/ Headphone connectors (2) – Connect to headphones, powered speakers, or sound systems. The audio signal is the same for both connectors.
Using Your Studio Laptop 6 Power button and light – Turns the power on or off when pressed. NOTICE: If the computer stops responding, press and hold the power button until the computer turns off completely (may take several seconds).
Using Your Studio Laptop 17
Using Your Studio Laptop Left Side Features 7 6 5 4 3 1 18 2
Using Your Studio Laptop 1 Dell Wi-Fi Catcher™ Network Locator button Turn on the wireless switch and press this button for a few seconds to scan for wireless networks in your vicinity. NOTE: The Wi-Fi Catcher Network Locator light appears only when the computer is turned off and the wireless switch is configured in the system setup program (BIOS) to control Wi-Fi network connections. NOTE: The Wi-Fi Catcher Network Locator is enabled and configured for use when your computer is shipped to you.
Using Your Studio Laptop 3 Wireless On/Off switch – Quickly turns Off or On all wireless devices such as WLAN cards and internal cards with Bluetooth wireless technology. 5 The wireless switch may be in the Off position when your computer is shipped to you. To turn the switch On, slide the switch toward the front of the computer until it clicks into place. - Off - On NOTE: This switch can be deactivated through Dell QuickSet or the BIOS (system setup program).
Using Your Studio Laptop 11 10 9 8 8 eSATA/USB combo connector – Connects to eSATA compatible storage devices, such as external hard disk drives or optical drives. Also, supports USB devices, such as a mouse, keyboard, printer, external drive, or MP3 player. 9 IEEE 1394 connector – Connects to high-speed serial multimedia devices that support IEEE 1394, such as some digital video cameras.
Using Your Studio Laptop 10 SD/MMC - MS/Pro - xD 8-in-1 Media card reader – Provides a fast and convenient way to view and share digital photos, music, videos, and documents stored on the following digital media memory cards: • Secure digital (SD) memory card • Secure Digital Input/Output (SDIO) card • MultiMedia Card (MMC) • Memory Stick • Memory Stick PRO • xD-Picture Card • Hi Speed-SD • Hi Density-SD NOTE: Your computer ships with a plastic blank installed in the media card slot.
Using Your Studio Laptop Computer Base and Keyboard Features 1 1 Caps Lock light – Turns on when using the Caps Lock key. 2 Touch pad – Provides the functionality of a mouse to move the cursor, drag or move selected items, and right-click or left-click by tapping the surface. It supports circular scrolling and zoom. To change the circular scrolling and zoom settings, double-click the Dell Touch pad icon in the notification area of your desktop.
Using Your Studio Laptop 8 5 7 6 24
Using Your Studio Laptop 5 Consumer IR – Allows certain software applications to be controlled by the Dell Travel Remote (an optional device that can be stored in the ExpressCard slot when not in use). 6 Fingerprint reader (optional) – Helps to keep you computer secure. When you slide your finger over the reader, it uses your unique fingerprint to authenticate your user identity (by automating the entry of user names and passwords) using DigitalPersona Personal software.
Using Your Studio Laptop Display Features The display panel holds an optional camera and accompanying dual microphones. 1 2 34 5 1 Display – Your display can vary based on selections you made when purchasing your computer. For more information about displays, see the Dell Technology Guide. 2 Left digital array microphone (optional) – Combines with the right digital array microphone to provide high quality sound for video chatting and voice recording.
Using Your Studio Laptop Media Controls To use the media controls, lightly touch the symbol and then release. The control’s symbol will shine for 2 seconds to confirm your selection and then fade away.
Using Your Studio Laptop Removing and Replacing the Battery CAUTION: Using an incompatible battery may increase the risk of fire or explosion. This computer should only use a battery purchased from Dell. Do not use batteries from other computers. CAUTION: Before removing the battery, shut down the computer, and remove external cables (including the AC adapter). To remove the battery: 1. Shut down the computer and remove all the external cables. 2. Turn the computer over. 3.
Using Your Studio Laptop Using the Optical Disc Drive NOTICE: Do not use non-standard-size or shape discs (including mini-CDs and miniDVDs) or you will damage the drive. NOTE: Do not move the computer while playing or recording CDs and DVDs. To eject a disc from the drive, gently touch the eject control . The control will flash to confirm a few seconds before ejecting the disc. Place the disc in the center of the disc slot, with the label facing upwards and gently push the disc into the slot.
Using Your Studio Laptop Software Features NOTE: For more information about the features described in this section, see the Dell Technology Guide on your hard drive or on the Dell Support website at support.dell.com. Productivity and Communication You can use your computer to create presentations, brochures, greeting cards, fliers, and spreadsheets. You can also edit and view digital photographs and images depending on the applications installed in your computer.
Using Your Studio Laptop Customizing the Desktop You can customize your desktop to change the appearance, resolution, wallpaper, screensaver, and so on by accessing the Personalize appearance and sounds window. To access the display properties window: 1. Right-click an open area of the desktop. 2. Click Personalize, to open the Personalize appearance and sounds window and learn more about your customization options.
Using Your Studio Laptop Backing Up Your Data It is recommended that you periodically back up files and folders on your computer. To back up files: 1. Click Start → Control Panel→ System and Maintenance→ Welcome Center→ Transfer files and settings. 2. Click Back up files or Back up computer. 3. Click Continue on Your User Account Control dialog box and follow the instructions in the Back up Files wizard.
Solving Problems This section provides troubleshooting information for your computer. If you cannot solve your problem using the following guidelines, see “Using Support Tools” on page 40 or “Contacting Dell” on page 55. CAUTION: Only trained service personnel should remove the computer cover. See the Service Manual on the Dell Support website at support.dell.com for advanced service and troubleshooting instructions.
Solving Problems The link integrity light on the integrated network connector lets you verify that your connection is working and provides information on the status: • Green — A good connection exists between a 10-Mbps network and the computer. • Orange — A good connection exists between a 100-Mbps network and the computer. • Yellow — A good connection exists between a 1000-Mbps network and the computer. • Off — The computer is not detecting a physical connection to the network.
Solving Problems not be responding. Press the power button until the computer turns off and then turn it back on. If the problem persists, see the Dell Technology Guide on the Dell Support website at support. dell.com. If the power light is blinking white — The computer is in standby mode. Press a key on the keyboard, move the pointer using the touch pad or a connected mouse, or press the power button to resume normal operation.
Solving Problems • Check if the memory module is compatible with your computer. Your computer supports DDR2 memory. For more information about the type of memory supported by your computer, see “Basic Specifications” on page 58. • Run the Dell Diagnostics (see “Dell Diagnostics” on page 42). • Reseat the memory modules (see the Service Manual on the Dell Support website at support.dell.com) to ensure that your computer is successfully communicating with the memory.
Solving Problems If a program is designed for an earlier Microsoft® Windows® operating system — Run the Program Compatibility Wizard. The Program Compatibility Wizard configures a program so that it runs in an environment similar to non-Windows Vista operating system environments. • Save and close any open files or programs and shut down your computer through the Start menu. • Check the software documentation or contact the software manufacturer for troubleshooting information: 1.
Using Support Tools Dell Support Center The Dell Support Center helps you find the service, support, and system-specific information you need. For more information about Dell Support Center and available support tools, click the Services tab at support.dell.com. Click the icon in the taskbar to run the application.
Using Support Tools system or the program that was running when the message appeared. Alternatively you could see the Dell Technology Guide on your computer or on the Dell Support website at support.dell.com or see “Contacting Dell” on page 55 for assistance. Alert! Previous attempts at booting this system have failed at checkpoint [nnnn].
Using Support Tools No timer tick interrupt — A chip on the system board might be malfunctioning or motherboard failure (see “Contacting Dell” on page 55 for assistance). USB over current error — Disconnect the USB device. Your USB device needs more power for it to function properly. Use an external power source to connect the USB device, or if your device has two USB cables, connect both of them.
Using Support Tools It is recommended that you print these procedures before you begin. NOTICE: Dell Diagnostics works only on Dell computers. NOTE: The Drivers and Utilities media is optional and may not ship with your computer. 1. Ensure that the computer is connected to an electrical outlet that is known to be working properly. 2. Turn on (or restart) your computer. 3. When the DELL™ logo appears, press immediately. Select Diagnostics from the boot menu and press .
Using Support Tools Starting Dell Diagnostics From the Drivers and Utilities Media 1. Insert the Drivers and Utilities media. 2. Shut down and restart the computer. When the DELL logo appears, press immediately. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again. NOTE: The next steps change the boot sequence for one time only.
Restoring Your Operating System You can restore your operating system in the following ways: • System Restore returns your computer to an earlier operating state without affecting data files. Use System Restore as the first solution for restoring your operating system and preserving data files. • Dell Factory Image Restore returns your hard drive to the operating state it was in when you purchased the computer.
Restoring Your Operating System Starting System Restore 1. Click Start . 2. In the Start Search box, type System Restore and press . NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired action. 3. Click Next and follow the remaining prompts on the screen. In the event that System Restore did not resolve the issue, you may undo the last system restore.
Restoring Your Operating System since you received your computer—including data files—are permanently deleted from the hard drive. Data files include documents, spreadsheets, e-mail messages, digital photos, music files, and so on. If possible, back up all data before using Factory Image Restore. Dell Factory Image Restore 1. Turn on the computer. When the Dell logo appears, press several times to access the Vista Advanced Boot Options Window. 2. Select Repair Your Computer. 3.
Restoring Your Operating System Operating System Reinstallation Before you Begin If you are considering reinstalling the Windows operating system to correct a problem with a newly installed driver, first try using Windows Device Driver Rollback. If Device Driver Rollback does not resolve the problem, then use System Restore to return your operating system to the operating state it was in before you installed the new device driver. See “Using Microsoft Windows System Restore” on page 45.
Restoring Your Operating System 4. Restart the computer. 5. When the DELL logo appears, press immediately. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again. NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in the system setup program. 6.
Getting Help If you experience a problem with your computer, you can complete the following steps to diagnose and troubleshoot the problem: 1. See “Solving Problems” on page 35 for information and procedures that pertain to the problem your computer is experiencing. 2. See “Dell Diagnostics” on page 42 for procedures on how to run Dell Diagnostics. 3. Fill out the “Diagnostic Checklist” on page 54. 4. Use Dell’s extensive suite of online services available at Dell Support (support.dell.
Getting Help Technical Support and Customer Service Dell’s support service is available to answer your questions about Dell hardware. Our support staff uses computer-based diagnostics to provide fast, accurate answers. To contact Dell’s support service, see “Before You Call” on page 54 and then see the contact information for your region or go to support.dell.com.
Getting Help Dell Support e-mail addresses • mobile_support@us.dell.com • support@us.dell.com • la-techsupport@dell.com (Latin America and Caribbean countries only) • apsupport@dell.com (Asian/Pacific countries only) Dell Marketing and Sales e-mail addresses • apmarketing@dell.com (Asian/Pacific countries only) • sales_canada@dell.com (Canada only) Anonymous file transfer protocol (FTP) • ftp.dell.com Log in as user: anonymous, and use your e-mail address as your password.
Getting Help Product Information If you need information about additional products available from Dell, or if you would like to place an order, visit the Dell website at www.dell.com. For the telephone number to call for your region or to speak to a sales specialist, see “Contacting Dell” on page 55. Returning Items for Repair Under Warranty or for Credit 4.
Getting Help Before You Call NOTE: Have your Express Service Code ready when you call. The code helps Dell’s automated-support telephone system direct your call more efficiently. You may also be asked for your Service Tag (located on the back or bottom of your computer). Remember to fill out the following Diagnostics Checklist. If possible, turn on your computer before you call Dell for assistance and call from a telephone at or near the computer.
Getting Help a printer, print each file. Otherwise, record the contents of each file before calling Dell. • Error message, beep code, or diagnostic code: • Description of problem and troubleshooting procedures you performed: Contacting Dell NOTE: See “Before You Call” on page 54 before you contact Dell. For customers in the United States, call 800-WWW-DELL (800-999-3355). To contact Dell for sales, technical support, or customer service issues: 1. Visit support.dell.com. 2.
Finding More Information and Resources If you need to: See: reinstall your operating system. the Operating System media. run a diagnostic program for your computer, reinstall notebook system software, or update drivers for your computer, and readme files. the Drivers and Utilities media. learn more about your operating system, maintaining peripherals, RAID, Internet, Bluetooth®, networking, and e-mail. the Dell Technology Guide installed on your hard drive.
Finding More Information and Resources If you need to: See: find safety best practices information for your computer the safety and regulatory documents that shipped with your computer and also see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. review Warranty information, Terms and Conditions (U.S. only), Safety instructions, Regulatory information, Ergonomics information, and End User License Agreement.
Basic Specifications System Model Processor Dell Studio 1737 Processor type • Intel® Celeron® Dual-Core This section provides basic information that you may need when setting up, updating drivers for, and upgrading your computer. NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view information about your computer.
Basic Specifications Processor External bus frequency Front Side Bus (Intel) System Information 533 MHz (Intel Celeron, Intel Pentium Dual-Core) 800/667 MHz (Intel Core2 Duo) System Information PCI bus 32 bits (PCI-Express used for video controllers) ExpressCard NOTE: The ExpressCard slot is designed only for ExpressCards. It does NOT support PC Cards.
Basic Specifications ExpressCard ExpressCard connector size Memory 26 pins Memory Memory module connector two user-accessible SODIMM connectors Memory module capacities 512 MB, 1 GB, and 2 GB Memory type 800 MHz SODIMM DDR2 Minimum memory configuration 1 GB Maximum memory configuration 4 GB NOTE: In order to take advantage of the dual channel bandwidth capability, both memory slots must be populated and must match in size.
Basic Specifications 8-in-1 Memory Card Reader Ports and Connectors Cards supported Consumer IR sensor compatible with Philips RC6 (receive only) Mini-Card two Type IIIA Mini-Card slots, one half-size MiniCard slot HDMI connector 19-pin Network adapter RJ-45 port USB five four-pin USB 2.
Basic Specifications Communications Modem: Type Controller Interface Video External V.
Basic Specifications Audio Audio type Camera (optional) 5.
Basic Specifications Display Types and Native Resolutions at 262K colors Display 17.0 inch CCFL WXGA+ TrueLife – 1440 x 3 (RGB) x 900 Viewing angles: Horizontal 17.0 inch WLED WXGA+ TrueLife – 1440 x 3 (RGB) x 900 ±55° (WLED WXGA+ TrueLife) min. ±55° (RGBLED WUXGA TrueLife) min. 17.0 inch CCFL WUXGA TrueLife – 1920 x 3 (RGB) x 1200 Types and Native Resolutions at 16.7M colors 17.
Basic Specifications Display Keyboard Pixel pitch: CCFL WXGA+ TrueLife 0.2550 mm WLED WXGA+ TrueLife 0.2550 mm RGBLED WUXGA TrueLife 0.19125 mm CCFL WUXGA TrueLife 0.19125 mm Controls brightness can be controlled through keyboard shortcuts (see Dell Technology Guide for more information) Number of keys 101 (U.S. and Canada); 102 (Europe); 105 (Japan); 104 (Brazil) Layout QWERTY/AZERTY/Kanji Touch Pad X/Y position resolution (graphics table mode) 240 cpi Size: Width 71.7-mm (2.
Basic Specifications Battery Battery Types and dimensions: 9-cell “smart” lithium ion depth - 49.95 mm (1.96 in) height - 38.6 mm (1.52 in) width - 266 mm (10.47 in) weight - 0.49kg (1.08 lb) 6-cell “smart” lithium ion depth - 49.95 mm (1.96 in) height - 20.4 mm (0.8 in) width - 204.9 mm (8.06 in) weight - 0.33kg (0.72 lb) Voltage 11.
Basic Specifications AC Adapter AC Adapter Types 90 W Temperature range: Input voltage 100–240 VAC Operating Input current (maximum) 1.5 A 0° to 40°C (32° to 104°F) Storage – Input frequency 50–60 Hz Output current 4.62 A (continuous) Output power 90 W Rated output voltage 19.5 VDC Connector types: DC connector 3 pin, 7.4 mm plug AC connector 2 pin - C7 (Japan only) Dimensions: 3 pin - C5 Height 16 mm (0.6 inches) Width 70 mm (2.8 inches) Length 147 mm (5.
Basic Specifications Physical Weight (with 6-cell battery) Computer Environment configurable to less than 3.48 kg (7.67 lbs) Computer Environment Temperature range: Operating 0° to 35°C (32° to 95°F) Storage 40° to 65°C (–40° to 149°F) – Relative humidity (maximum): Operating 10% to 90% (noncondensing) Storage 10% to 95% (noncondensing) Maximum vibration (using a random vibration spectrum that simulates user environment): Operating 66 0.66 GRMS Storage 1.
Appendix Macrovision Product Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Index A Contacting Dell online 53 airflow, allowing 5 customer service 49 AutoTech 50 customizing your desktop 30 B backups creating 32 your energy settings 31 D damage, avoiding 5 C calling Dell 52 CDs, playing and creating 30 computer capabilities 30 computer, setting up 5 computer stand 6 connect(ing) to the Internet 9 conserving energy 31 68 data, backing up 32 DellConnect 49 Dell Diagnostics 40 Dell Factory Image Restore 43 Dell Support Center 38 Dell support website 55 Dell Technology Guide
Index Diagnostic Checklist 52 disc drive H hardware problems supported disc sizes 29 discs ejecting 29 diagnosing 40 Hardware Troubleshooter 40 help using 29 drivers and downloads 55 DVDs, playing and creating 30 E getting assistance and support 48 horizontal and vertical stand options 6 I installing the stand 6 email addresses for technical support 50 energy conserving 31 F finding more information 54 Internet connection 10 ISP Internet Service Provider 10 M memory problems solving 35 FTP logi
Index N restoring factory image 44 network connection fixing 33 network speed testing 33 O S setup, before you begin 5 shipping products for return or repair 51 software features 30 order status 50 software problems 36 solving problems 33 P power problems, solving 34 power strips, using 6 problems, solving 33 products information and purchasing 51 specifications 56 support email addresses 50 support sites worldwide 49 System Messages 38 system reinstall options 43 R System Restore 43 reinstallin
Index V ventilation, ensuring 5 W warranty returns 51 Windows, reinstalling 43 Windows Vista® 9 Program Compatibility Wizard 37 reinstalling 46 setup 9 wired network network cable, connecting 7 wireless network connection 33 wireless switch 9, 33 71
Printed in the U.S.A. www.dell.com | support.dell.
Printed in Malaysia. www.dell.com | support.dell.
Printed in Ireland. www.dell.com | support.dell.
Printed in Brazil. www.dell.com | support.dell.
Printed in China. Printed on recycled paper. www.dell.com | support.dell.
