SETUP GUIDE
SETUP GUIDE Regulatory model: P06F series Regulatory type: P06F001
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. __________________ Information in this document is subject to change without notice. © 2010 Dell Inc. All rights reserved.
Contents Setting Up Your Studio Laptop ����������������������5 Computer Base Features ������������������������������ 28 Before Setting Up Your Computer ���������������� 5 Touch Pad Gestures �������������������������������������� 31 Connect the AC Adapter �������������������������������� 6 Multimedia Control Keys ������������������������������ 32 Connect the Network Cable (Optional) ���������� 7 Display Features �������������������������������������������� 34 Press the Power Button ������������
Contents Power Problems �������������������������������������������� 45 Online Services ���������������������������������������������� 67 Memory Problems ������������������������������������������ 47 Automated Order-Status Service ���������������� 68 Lockups and Software Problems ���������������� 48 Product Information �������������������������������������� 68 Using Support Tools ������������������������������������50 Returning Items for Repair Under Warranty or for Credit ���������������������
Setting Up Your Studio Laptop This section provides information about setting up your Dell™ Studio™ laptop. Before Setting Up Your Computer When positioning your computer, ensure that you allow easy access to a power source, adequate ventilation, and a level surface to place your computer. Restricting airflow around your Studio laptop may cause it to overheat. To prevent overheating ensure that you leave at least 10.2 cm (4 inches) at the back of the computer and a minimum of 5.
Setting Up Your Studio Laptop Connect the AC Adapter Connect the AC adapter to the computer and then plug it into a wall outlet or surge protector. WARNING: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to a power strip or electrical outlet may cause fire or permanent damage to your computer.
Setting Up Your Studio Laptop Connect the Network Cable (Optional) To use a wired network connection, connect the network cable.
Setting Up Your Studio Laptop Press the Power Button 8
Setting Up Your Studio Laptop Set Up Microsoft Windows Your Dell computer is preconfigured with the Microsoft® Windows® operating system. To set up Windows for the first time, follow the instructions on the screen. These steps are mandatory and may take some time to complete. The Windows setup screens will take you through several procedures including accepting license agreements, setting preferences, and setting up an Internet connection. CAUTION: Do not interrupt the operating system’s setup process.
Setting Up Your Studio Laptop Create System Recovery Media (Recommended) NOTE: It is recommended that you create a system recovery media as soon as you set up Microsoft Windows. The system recovery media can be used to restore your computer to the operating state it was in when you purchased the computer, while preserving data files (without the need of the Operating System disc).
Setting Up Your Studio Laptop To create a system recovery media: 1. Ensure that the AC adapter is connected (see “Connect the AC Adapter” on page 6). 2. Insert the disc or USB key in the computer. 3. Click Start → Programs→ Dell DataSafe Local Backup. 4. Click Create Recovery Media. 5. Follow the instructions on the screen. NOTE: For information on using the system recovery media, see “System Recovery Media” on page 62.
Setting Up Your Studio Laptop Install the SIM Card (Optional) NOTE: Installing a SIM card is not required if you are using an EVDO card to access the Internet. Installing a Subscriber Identity Module (SIM) card allows you to browse the Internet, check e-mail, and connect to a Virtual Private Network. To access these features, you must be within the network of your cellular service provider. To install the SIM card: 1. Turn off your computer. 2.
Setting Up Your Studio Laptop 1 2 3 battery bay SIM card slot SIM card 3 2 1 13
Setting Up Your Studio Laptop Enable or Disable Wireless (Optional) 14
Setting Up Your Studio Laptop To enable wireless: 1. Ensure that your computer is turned on. 2. Press the wireless key on the keyboard. A confirmation of your selection appears on the screen. Wireless enabled Wireless disabled To disable wireless: Press the wireless key on the keyboard again to turn off all radios.
Setting Up Your Studio Laptop Set Up Wireless Display (Optional) NOTE: For more information about wireless display, see the wireless display adapter Quick Start Guide.
Setting Up Your Studio Laptop 7. Press the wireless display key on the keyboard. The Intel® Wireless Display window appears. 8. Select Scan for available displays. 9. Select your wireless display adapter from the Detected wireless displays list. 10. Enter the security code that appears on your TV. To enable wireless display: 1. Press the wireless display key on the keyboard. The Intel® Wireless Display window appears. 2. Select Connect to Existing Adapter.
Setting Up Your Studio Laptop Connect to the Internet (Optional) To connect to the Internet, you need an external modem or network connection and an Internet Service Provider (ISP). If an external USB modem or WLAN adapter is not a part of your original order, you can purchase one at www.dell.com. Setting Up a Wired Connection • If you are using a DSL or cable/satellite modem connection, contact your ISP or cellular telephone service for setup instructions.
Setting Up Your Studio Laptop Setting Up Your Internet Connection To set up your Internet connection: ISPs and ISP offerings vary by country. Contact your ISP for offerings available in your country. 1. Save and close any open files, and exit any open programs. If you cannot connect to the Internet but have successfully connected in the past, the ISP might have a service outage. Contact your ISP to check the service status, or try connecting again later. 2.
Using Your Studio Laptop This section provides information about the features available on your Studio laptop.
Using Your Studio Laptop 1 USB 2.0 connector — Connects to USB devices, such as a mouse, keyboard, printer, external drive, or MP3 player. 2 Optical drive — Plays or records CDs and DVDs. Ensure that the side with print or writing is facing upward when inserting discs. CAUTION: This drive supports nonstandard-sized and -shaped discs; however, degradation in drive performance may be experienced, and in extreme cases, the drive may be damaged.
Using Your Studio Laptop Left View Features 1 22 2 3 4 5 6 7 8 9
Using Your Studio Laptop 1 Security cable slot — Attaches a commercially available security cable to the computer. NOTE: Before you buy a security cable, ensure that it fits into the security cable slot on your computer. 2 3 4 5 AC adapter connector — Connects to the AC adapter to power the computer and charge the battery. Network connector — Connects your computer to a network or a broadband device.
Using Your Studio Laptop 7 eSATA/USB combo connector with USB PowerShare — Connects to eSATA compatible storage devices (such as external hard drives or optical drives) or USB devices (such as a mouse, keyboard, printer, external drive, or MP3 player). The USB PowerShare feature allows you to charge USB devices when the computer is powered on/off or in sleep state. NOTE: Certain USB devices may not charge when the computer is powered off or in sleep state.
Using Your Studio Laptop 9 7-in-1 Media card reader — Provides a fast and convenient way to view and share digital photos, music, videos, and documents stored on the memory cards (see the Comprehensive Specifications at support.dell.com/manuals for supported memory cards). NOTE: Your computer ships with a plastic blank installed in the memory card slot. Blanks protect unused slots from dust and other particles.
Using Your Studio Laptop Front View Features 1 26 2 3
Using Your Studio Laptop 1 AC adapter/battery indicator light — Indicates the AC adapter or battery states when the computer is closed or the battery power is low.
Using Your Studio Laptop Computer Base Features 4 1 28 2 3
Using Your Studio Laptop 1 Keyboard/multimedia control keys/backlit keyboard (optional) — For more information about the keyboard, see the Dell Technology Guide. For more information about the multimedia control keys, see “Multimedia Control Keys” on page 32. If you purchased the optional backlit keyboard, the F6 key has a backlit keyboard icon on it. The optional backlit keyboard provides visibility in dark environments by illuminating all the symbols on the keys.
Using Your Studio Laptop 4 Power button and light — Turns the computer on or off when pressed. The light in the button indicates the following power states: • Solid white — The computer is on. • Breathing white — The computer is in standby mode. • Off — The computer is off or in hibernate state.
Using Your Studio Laptop Touch Pad Gestures Zoom Allows you to increase or decrease the magnification of the screen content. The zoom feature includes: Pinch — Allows you to zoom in or zoom out by moving two fingers apart or bringing them closer together on the touch pad. To zoom in: To zoom out : Move two fingers apart to zoom in on the active window. Move two fingers close together to zoom out on the active window.
Using Your Studio Laptop Multimedia Control Keys The multimedia control keys are located on the keyboard. To use the multimedia controls, press the required key. You can configure the multimedia control keys on the keyboard using the Function Key Behavior in the System Setup (BIOS) utility. To access the Function Key Behavior: 1. Press during POST (Power On Self Test) to enter the System Setup (BIOS) utility. 2. In the Function Key Behavior, select Multimedia Key First or Function Key First.
Using Your Studio Laptop Mute the sound Play or pause Decrease the volume level Play the next track or chapter Increase the volume level Eject the disc Play the previous track or chapter 33
Using Your Studio Laptop Display Features 1 34 2 3 4
Using Your Studio Laptop 1 Digital array microphone — Provides high quality sound for video chatting and voice recording. 2 Camera activity indicator — Indicates if the camera is on or off. 3 Camera — Built-in camera for video capture, conferencing, and chat. 4 Display — Your display can vary based on selections you made when purchasing your computer. For more information about displays, see the Dell Technology Guide.
Using Your Studio Laptop Switchable Graphics The switchable graphics feature allows you to switch to either the High-performance or Powersaving Graphic Processing Unit (GPU) available on your computer. Using the Power-saving GPU ensures lesser power consumption and extends the battery life. You can switch to the High-performance GPU when running graphic-intensive applications that require more power, such as 3D games. To switch between High-performance GPU and Power-saving GPU: 1. Right-click the desktop.
Using Your Studio Laptop Dell Extended Battery Life The Dell Extended Battery Life feature increases the duration your computer operates on battery power. This feature is disabled by default. To enable or disable Dell Extended Battery Life: 1. Press . The Battery Meter window appears. 2. On the Battery Status tab, click Disable or Enable depending on your preference. To learn more about the customization options for Dell Extended Battery Life: 1. Press . The Battery Meter window appears. 2.
Using Your Studio Laptop Removing and Replacing the Battery WARNING: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. WARNING: Using an incompatible battery may increase the risk of fire or explosion. This computer should only use a battery purchased from Dell. Do not use batteries from other computers. WARNING: Before removing the battery, shut down the computer, and remove external cables (including the AC adapter).
Using Your Studio Laptop 3 1 2 1 2 3 battery release latches (2) battery bay battery 39
Using Your Studio Laptop Software Features NOTE: For more information about the features described in this section, see the Dell Technology Guide available on your hard drive or at support.dell.com. Productivity and Communication You can use your computer to create presentations, brochures, greeting cards, fliers, and spreadsheets. You can also edit and view digital photographs and images. Check your purchase order for software installed on your computer.
Using Your Studio Laptop Dell DataSafe Online Backup NOTE: Dell DataSafe Online may not be available in all regions. NOTE: A broadband connection is recommended for fast upload/download speeds. Dell DataSafe Online is an automated backup and recovery service that helps protect your data and other important files from catastrophic incidents like theft, fire, or natural disasters. You can access the service on your computer using a password‑protected account.
Using Your Studio Laptop Dell Dock The Dell Dock is a group of icons that provides easy access to frequently-used applications, files, and folders. You can personalize the Dock by: • Adding or removing icons • Changing the color and location of the Dock • Grouping related icons into categories Add a Category • Changing the behavior of the icons Remove a Category or Icon 1. Right-click the Dock, click Add→ Category. The Add/Edit Category window is displayed. 1.
Solving Problems This section provides troubleshooting information for your computer. If you cannot solve your problem using the following guidelines, see “Using Support Tools” on page 50 or “Contacting Dell” on page 72. Beep Code Possible Problem One Possible system board failure — BIOS ROM checksum failure Two No RAM detected Beep Codes Your computer may emit a series of beeps during start-up if there are errors or problems. This series of beeps, called a beep code, identifies a problem.
Solving Problems Network Problems Wireless Connections If the wireless network connection is lost — The wireless router is offline or wireless has been disabled on the computer. • Ensure that wireless is enabled (see “Enable or Disable Wireless” on page 14). • Check your wireless router to ensure it is powered on and connected to your data source (cable modem or network hub). • Re-establish your connection to the wireless router (see “Setting Up a Wireless Connection” on page 18).
Solving Problems Wireless Display Problems Power Problems If you are not able to setup the wireless display — wireless may be disabled on your computer or switchable graphics may be set to High-Performance GPU. If the power light is off — The computer is either turned off, in hibernate state, or not receiving power. • Ensure that wireless is enabled (see “Enable or Disable Wireless” on page 14. • Press the power button. The computer resumes normal operation if it is off or in hibernate mode.
Solving Problems • Check the AC adapter cable connections. If the AC adapter has a light, ensure that the light on the AC adapter is on. If the power light is solid white and the computer is not responding — The display may not be responding. Press the power button until the computer turns off and then turn it back on. If the power light is breathing white — The computer is in standby mode. Move the mouse, touch the touch pad, or press the power button to resume normal operation.
Solving Problems Memory Problems If you receive an insufficient memory message — • Save and close any open files and exit any open programs you are not using to see if that resolves the problem. • See the software documentation for minimum memory requirements. If necessary, install additional memory (see the Service Manual at support.dell.com/manuals). • Reseat the memory modules (see the Service Manual at support.dell.com/manuals) to ensure that your computer is successfully communicating with the memory.
Solving Problems Lockups and Software Problems If the computer does not start up — Ensure that the power cable is firmly connected to the computer and to the electrical outlet. If a program stops responding — End the program: 1. Press simultaneously. 2. Click Applications. 3. Click the program that is no longer responding 4. Click End Task. If a program crashes repeatedly — Check the software documentation. If necessary, uninstall and then reinstall the program.
Solving Problems To run the Program Compatibility Wizard: 1. Click Start → Control Panel→ Programs→ Run programs made for previous versions of Windows. 2. In the welcome screen, click Next. 3. Follow the instructions on the screen.. If you have other software problems — • Back up your files immediately. • Use a virus-scanning program to check the hard drive or CDs. • Save and close any open files or programs and shut down your computer through the Start menu.
Using Support Tools Dell Support Center The Dell Support Center helps you find the service, support, and system-specific information you need. To launch the application, click the taskbar. icon in the The Dell Support Center home page displays your computer’s model number, service tag, express service code, and service contact information.
Using Support Tools My Dell Downloads NOTE: My Dell Downloads may not be available in all regions. Some of the software pre-installed on your new computer do not include a backup CD or DVD. This software is available at My Dell Downloads. From this website you can download available software for reinstallation or create your own backup media. To register and use My Dell Downloads: 1. Go to downloadstore.dell.com/media. 2. Follow the instructions on the screen to register and download the software. 3.
Using Support Tools CMOS checksum error — Possible system board failure or Real Time Clock (RTC) battery low. Replace the coin-cell battery (see the Service Manual at support.dell.com/manuals) or contact Dell (see “Contacting Dell” on page 72). CPU fan failure — CPU fan has failed. Replace the CPU fan (see the Service Manual at support.dell.com/manuals). Hard-disk drive failure — Possible hard drive failure during POST. Contact Dell (see “Contacting Dell” on page 72).
Using Support Tools USB over current error — Disconnect the USB device. Your USB device needs more power for it to function properly. Use an external power source to connect the USB device, or if your device has two USB cables, connect both of them. CAUTION - Hard Drive SELF MONITORING SYSTEM has reported that a parameter has exceeded its normal operating range. It is recommended that you back up your data regularly. A parameter out of range may or may not indicate a potential hard drive problem — S.M.A.R.
Using Support Tools Dell Diagnostics If you experience a problem with your computer, perform the checks in “Lockups and Software Problems” on page 48 and run the Dell Diagnostics before you contact Dell for technical assistance. NOTE: Dell Diagnostics works only on Dell computers. NOTE: The Drivers and Utilities disc may not ship with your computer. See the Comprehensive Specifications at support.dell.
Using Support Tools NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from the Drivers and Utilities disc. If PSA is invoked: a. The PSA starts running tests. b. If the PSA completes successfully, the following message appears: “No problems have been found with this system so far. Do you want to run the remaining memory tests? This will take about 30 minutes or more. Do you want to continue? (Recommended).” c.
Using Support Tools 5. If a problem is encountered during a test, a message appears with an error code and a description of the problem. Write down the error code and problem description and contact Dell (see “Contacting Dell” on page 72). NOTE: The Service Tag for your computer is displayed at the top of each test screen. The Service Tag helps you identify your computer when you contact Dell. 6. When the tests are complete, close the test screen to return to the Choose An Option window. 7.
Using Support Tools 3. When the boot device list appears, highlight CD/DVD/CD-RW and press . 4. Select the Boot from CD-ROM option from the menu that appears and press . 5. Type 1 to start the CD menu and press to proceed. 6. Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer. NOTE: The Service Tag for your computer is displayed at the top of each test screen.
Restoring Your Operating System You can restore the operating system on your computer using any of the following options: CAUTION: Using Dell Factory Image Restore or the Operating System disc permanently deletes all data files on your computer. If possible, backup your data files before using these options.
Restoring Your Operating System System Restore The Microsoft® Windows® operating systems provide a System Restore option which allows you to return your computer to an earlier operating state (without affecting data files) if changes to the hardware, software, or other system settings have left the computer in an undesirable operating state. Any changes that System Restore makes to your computer are completely reversible. To run System Restore: 1. Click Start . 2.
Restoring Your Operating System Dell DataSafe Local Backup CAUTION: Using Dell DataSafe Local Backup permanently removes any programs or drivers installed after you received your computer. Prepare backup media of applications you need to install on your computer before using Dell DataSafe Local Backup. Use Dell DataSafe Local Backup only if System Restore did not resolve your operating system problem.
Restoring Your Operating System NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again. 5. Select Repair Your Computer. 6. Select Dell Factory Image Recovery and DataSafe Options and follow the instructions on the screen. NOTE: The duration of the restoration process depends on the amount of data to be restored. NOTE: For more information, see the knowledge base article 353560 at support.
Restoring Your Operating System System Recovery Media CAUTION: Although the system recovery media is designed to preserve the data files on your computer, it is recommended that you backup your data files before using the system recovery media. You can use the system recovery media, created using Dell DataSafe Local Backup, to return your hard drive to the operating state it was in when you purchased the computer while persevering the data files on your computer.
Restoring Your Operating System Dell Factory Image Restore WARNING: Using Dell Factory Image Restore permanently deletes all data on the hard drive and removes any programs or drivers installed after you received your computer. If possible, back up the data before using this option. Use Dell Factory Image Restore only if System Restore did not resolve your operating system problem. NOTE: Dell Factory Image Restore may not be available in certain countries or on certain computers.
Restoring Your Operating System To restore the Dell factory image on your hard drive: 1. Turn on the computer. 2. When the DELL logo appears, press several times to access the Advanced Boot Options window. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop, then shut down your computer and try again. 3. Select Repair Your Computer. The System Recovery Options window appears. 4. Select a keyboard layout and click Next. 5.
Getting Help If you experience a problem with your computer, you can complete the following steps to diagnose and troubleshoot the problem: 6. If the preceding steps have not resolved the problem, see “Before You Call” on page 70. 1. See “Solving Problems” on page 43 for information and procedures that pertain to the problem your computer is experiencing. NOTE: Call Dell Support from a telephone near or at the computer so that the support staff can assist you with any necessary procedures. 2.
Getting Help Technical Support and Customer Service Dell’s support service is available to answer your questions about Dell hardware. Our support staff use computer-based diagnostics to provide fast, accurate answers. To contact Dell’s support service, see “Before You Call” on page 70 and “Contacting Dell” on page 72.
Getting Help Online Services You can learn about Dell products and services on the following websites: • www.dell.com • www.dell.com/ap (Asian/Pacific countries only) • www.dell.com/jp (Japan only) • www.euro.dell.com (Europe only) • www.dell.com/la (Latin American and Caribbean countries) • www.dell.ca (Canada only) You can access Dell Support through the following websites and e-mail addresses: Dell Support websites • support.dell.com • support.jp.dell.
Getting Help Automated Order-Status Service To check on the status of any Dell products that you have ordered, you can go to support.dell.com, or you can call the automated order-status service. A recording prompts you for the information needed to locate and report on your order. For the telephone number to call your region, see “Contacting Dell” on page 72. If you have a problem with your order, such as missing parts, wrong parts, or incorrect billing, contact Dell for customer assistance.
Getting Help Returning Items for Repair Under Warranty or for Credit Prepare all items being returned, whether for repair or credit, as follows: NOTE: Before you return the product to Dell, make sure to back up any data on the hard drive and on any other storage device in the product. Remove any and all confidential, proprietary and personal information, as well as removable media, such as CDs and ExpressCards.
Getting Help Before You Call NOTE: Have your Express Service Code ready when you call. The code helps Dell’s automatedsupport telephone system direct your call more efficiently. You may also be asked for your Service Tag. Locating Your Service Tag The Service Tag is located on the bottom of your computer.
Getting Help Remember to fill out the following Diagnostics Checklist. If possible, turn on your computer before you call Dell for assistance and call from a telephone at or near the computer. You may be asked to type some commands at the keyboard, relay detailed information during operations, or try other troubleshooting steps possible only at the computer itself. Ensure that the computer documentation is available.
Getting Help See your operating system documentation to determine the contents of the computer’s start-up files. If the computer is connected to a printer, print each file. Otherwise, record the contents of each file before calling Dell. • Error message, beep code, or diagnostic code: • Description of problem and troubleshooting procedures you performed: Contacting Dell For customers in the United States, call 800-WWW-DELL (800-999-3355).
Getting Help 73
Finding More Information and Resources If you need to: See: reinstall your operating system “System Recovery Media” on page 62 run a diagnostic program for your computer “Dell Diagnostics” on page 54 reinstall laptop system software “My Dell Downloads” on page 51 upgrade your computer with new or additional memory, or a new hard drive reinstall or replace a worn or defective part the Service Manual at support.dell.
Finding More Information and Resources If you need to: See: find your Service Tag/Express Service Code — You must use the service tag to identify your computer on support.dell.
Basic Specifications This section provides information that you may need when setting up, updating drivers for, and upgrading your computer. For more detailed specifications, see the Comprehensive Specifications at support.dell.com/manuals. NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view information about your computer.
Basic Specifications Connectors Connectors Audio one microphone-in connector, one stereo headphone/speaker connector Mini-Card one Type IIIA full Mini-Card slot, one half-size Mini-Card slot HDMI one 19-pin connector Network one RJ45 connector USB two 4-pin USB 2.0-compliant connectors Mini DisplayPort one 20-pin connector ExpressCard one 34 mm slot Media Card Reader one 7-in-1 slot eSATA one seven-pin/four-pin eSATA/USB combo connector Communications Modem (optional) external V.
Basic Specifications Camera Resolution Battery 2.0 megapixel 9-cell “smart” lithium ion Video resolution 160 x 120 ~1600 x 1200 Height 41.7 mm (1.64 inches) Display Width 264.6 mm (10.41 inches) Depth 53.2 mm (2.09 inches) Weight 0.52 kg (1.15 lb) Voltage 11.1 VDC Charge time (approximate) 4 hours (when the computer is turned off) Operating time (approximate) varies depending on operating conditions Type 15.6” HD WLED backlight TrueLife Height 193.54 mm (7.62 inches) Width 344.
Basic Specifications AC Adapter Physical Input voltage 100–240 VAC Input current 1.5 A Input frequency 50–60 Hz Output power 90 W 65 W (Auto-Air adapter) Rated output current 4.62 A (90 W) Rated output voltage 19.5 VDC Operating temperature 0° to 35°C (32° to 95°F) Storage temperature –40° to 65°C (–40° to 149°F) Height 18 mm to 25.3 mm (0.71 inches to 0.99 inches) Width 382.0 mm (15.04 inches) Depth 252.0 mm (9.92 inches) Weight (with optical drive and battery) 2.51 kb (5.
Basic Specifications Computer Environment Computer Environment Temperature range Maximum shock (for operating — measured with Dell Diagnostics running on the hard drive and a 2-ms half-sine pulse; for non-operating — measured with the hard drive in head-parked position and a 2-ms half‑sine pulse) Operating 0° to 35°C (32° to 95°F) Storage –40° to 65°C (–40° to 149°F) Relative humidity (maximum) Operating 10% to 90% (non condensing) Storage 5% to 95% (non condensing) Maximum vibration (using a r
Appendix Macrovision Product Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Index A AC adapter 23, 79 light status 27 airflow, allowing 5 audio connector 27, 77 B battery 37, 78 light status 27 computer environment 80 repair 69 Service Tag location 70 setting up 5 software 40 warranty 69 connect(ing) to the Internet 18 beep codes 43 connectors 77 C Contacting Dell online 72 camera 35, 78 D CDs, playing and creating 40 damage, avoiding 5 chipset 76 Dell DataSafe Online Backup 41 communications 77 Dell Diagnostics 54 82
Dell Factory Image Restore 63 Diagnostic Checklist 71 digital array microphone 35 display 78 drivers and downloads 75 DVDs, playing and creating 40 E eject 33 e-mail addresses for technical support 67 H HDMI 23, 77 headphone connector 27 help getting assistance and support 65 I Internet connection 18 ISP Internet Service Provider 18 eSATA 24, 77 K ExpressCard 24, 77 keyboard/multimedia control keys 29, 32 F M FTP login, anonymous 67 Macrovision 81 Media Card Reader 25, 77 memory 76 memory problem
Index microphone connector 27 Mini-Card 77 Mini DisplayPort connector 23, 77 modem 77 mute 33 N network connector 23, 77 network problems 44 O R recovering data 41 restoring factory image 63 S security cable 23 service tag 70 setup, before you begin 5 SIM card 12 software 40 optical drive 21 software compatability 49 P support e-mail addresses 67 software problems 48 pause 33 switchable graphics 36 play 33 system reinstall options 58 power/battery indicator lights 27 power button 30 power pro
Index T W touch pad wired network buttons 29 gestures 31 location 29 U USB 21, 23 network cable, connecting 7 wireless cards 77 display 16 setting up 18 USB PowerShare 24 V ventilation, ensuring 5 volume 33 85
Printed in the U.S.A. www.dell.com | support.dell.
