Quick Reference Guide

Multimedia 207
5.1 Audio
NOTE: 5.1 Audio may not be supported on all computers.
5.1 refers to the number of audio channels in most surround-sound
configurations. The 5 refers to the five main audio channels: left front, center
front, right front, left surround and right surround; while the 1 refers to the
low frequency effects channel (LFE).
A 5.1 signal can be provided by the optical media or a satellite TV channel.
Setting up the 5.1 Audio Connections
To set up the 5.1 audio connections:
Click Start →Control Panel→Additional Options. Run IDT Audio
Control Panel. In the Jacks tab, there are three connector icons. Follow the
instructions to finish the setup.
1
Click the microphone icon, select Device: Rear Speakers , and plug your
rear speaker cable to the audio in/microphone connector.
2 Click the middle headphone icon, select Device: Center/LFE Speaker ,
and plug your center/woofer speaker cable to the middle audio
out/headphone connector.
3 Click the right headphone icon, select Device: Front Speaker , and plug
your front speaker cable to the right audio out/headphone connector.