Install Guide

18 Best Practices for Sharing an iSCSI SAN Infrastructure with Dell PS Series and SC Series Storage using VMware vSphere
Hosts | 2015-A-BP-INF
1. From the VMware ESXi Web GUI (local host management utility that has replaced the C-Sharp
client), select Networking, Virtual switches, and click Add standard virtual switch.
2. Click on Add uplink to add the second uplink. Input the vSwitch Name (iSCSI), the MTU (9000),
select the appropriate vmnics in both Uplink 1 and Uplink 2, and click Add.
3. From Networking, select VMKernel NICs and click Add VMKernel NIC.
4. Input the name for the New Port Group, select the Virtual Switch from the drop-down box, enter the
MTU (9000), select the IP Version from the drop-down box, expand the IP settings to enter Static
information (or use DHCP), and click Create.