White Papers

Switch command-line configuration (OS 10.x)
20 Dell EMC Networking S4048-ON and S4048T-ON Switch Configuration Guide for Dell EMC SC Series and Dell PS Series SANs | SCG1026
3.2.13 Save configuration
OS10# copy running-configuration startup-configuration
3.2.14 Reload switch
OS10# reload
Proceed to reboot the system? [confirm yes/no]:yes
3.2.15 Configure additional switches
Repeat the commands from section 3.2 to configure DCB on additional switches.
3.2.16 Verify DCB status
OS10# show lldp dcbx interface ethernet 1/1/<port-number>
3.2.17 Show commands to verify DCBx, ETS, and PFC status on individual ports
OS10# show lldp dcbx interface ethernet 1/1/<port-number>
OS10# show lldp dcbx interface ethernet 1/1/<port-number> pfc detail
OS10# show lldp dcbx interface ethernet 1/1/<port-number> ets detail