White Papers

24 Configuring iSCSI Connectivity with VMware vSphere 6 and Dell PS Series Storage | TR1075
4. Click OK to apply.
To enable Jumbo Frames on the VMkernel ports:
1. Select the Hosts and clusters inventory view, and select the individual host with the VMkernel
ports you wish to enable Jumbo Frames on.
2. Select the Manage tab, then the Networking button, and click VMkernel adapters.
3. Select one of the VMkernel ports assigned to iSCSI, and then click the Edit setting icon (the third
icon on the toolbar).
4. From the Edit setting wizard, select NIC settings.
5. Change the MTU setting from the default of 1500 to 9000.
6. Click OK to apply.
7. Repeat these steps for each VMkernel assigned to iSCSI.