White Papers

19 Configuring iSCSI Connectivity with VMware vSphere 6 and Dell PS Series Storage | TR1075
5. Select Uplink 2 and click the down-arrow button to move it to the Unused uplinks. If there are
additional uplinks, they must also be moved. Click OK to apply the change.
6. Repeat these steps on the each of the distributed port groups created for iSCSI until each port
group and uplink has a one-to-one mapping.
6.2.4 Step 4: Add the VMkernel adapters to the vDS
This step adds the vDS to a host and creates VMkernel ports which will be linked 1-to-1 to a particular
distributed port group. The step consists of the following phases: selecting a host, selecting which
network adapters on that host to use, and adding the VMkernel adapters to the vDS.
1. Return to the Distributed Switches button, select the previously created vDS (DSwitch_iSCSI), and
click the icon, Add hosts to this distributed switch and migrate physical or virtual network
adapters (the fourth icon on the toolbar).