Release Notes

FS Series NAS configuration
62 Dell PS Series Configuration Guide
12.2 FS7600/FS7610 connection paths
The PS Series NAS appliances require the following networks:
• Client network: Used for client access to the NFS exports and CIFS shares hosted by the NAS
cluster.
• SAN/internal network: Used for internal communication between the controllers and communication
between the controllers and the PS Series SAN. The SAN and Internal networks use the same set of
switches.
It is best to keep the client and SAN side networks physically separate and deploy two switches on both sides
to protect against a switch failure.
FS7600 and FS7610 networks
See figures below for network connections.