Release Notes

FS Series NAS configuration
59 Dell PS Series Configuration Guide
12 FS Series NAS configuration
This section provides detailed connection diagrams demonstrating how to set up fully connected iSCSI SAN
and client LAN connection paths for the FS7500 and FS7600/FS7610 appliances.
Note: It is recommended to keep the client and SAN side networks physically separate and deploy at least
two switches on both sides to provide redundancy in the event of a switch failure.
Table 38 lists the basic functional details for each FS Series product.
FS Series Models
FS Series model
System components
I/O connections
FS7500
2 x 1U NAS appliance; dual
active-active controller
configuration
1 x 1U Battery backup power
supply unit (BPS)
Client LAN: 8x1GbE per
appliance (4 per controller node)
iSCSI SAN: 8x1GbE per system
(4 per controller node)
Controller Interconnect:
8x1GbE per system (4 per
controller node)
FS7600
2U NAS appliance with two
active/active NAS controllers.
Client LAN: 8x1GbE per
appliance (4 per controller node)
iSCSI SAN: 8x1GbE per system
(4 per controller node)
FS7610
2U NAS appliance with two
active/active NAS controllers.
Client LAN: 4x10GbE per
appliance (2 per controller node)
iSCSI SAN: 4x10GbE per system
(2 per controller node)