Install Guide

Configure VMware hosts to access SC Series arrays with SAS FE ports
32 Dell EMC SC Series Storage with SAS Front-end Support for VMware vSphere | 3027-CD-VM
3.8.2.1 Connect to mapped storage
1. In the vSphere Embedded Host Client, select Host > Manage > Storage.
2. In the Adapters tab, select the HBA (in this case, the Dell 12Gb SAS HBA) and click the Rescan
button.
3. Open the Devices tab to view the new SAS storage devices.
3.8.2.2 Create a datastore
1. To create a new datastore from newly discovered SAS storage from the vSphere Embedded Host
Client, navigate to Host > Manage > Storage, and in the Datastores tab click the New datastore
button.
2. Follow the New datastore wizard:
3. Select the type of datastore to create. Click Next. (VMFS datastore in this case)