Install Guide

Configure VMware hosts to access SC Series arrays with SAS FE ports
22 Dell EMC SC Series Storage with SAS Front-end Support for VMware vSphere | 3027-CD-VM
14. In the Hardware tab, click Chassis > Controllers > Top Controller > IO Ports > SAS and then
select the SAS port that is connected to the first host (S1350 Top in this example). Ports that are
assigned intuitive names before this step will make this process easier. Click the Connectivity tab
and note the initiator WWN for the host SAS port (ending in 4C00 in this example).
15. Repeat step 2 and note the initiator WWNs for the other host SAS ports. In this example, the initiator
WWN for port S1351 Top ends in 4801.
16. Repeat this process for the second (bottom) controller. In this example, the initiator WWNs end in
4C01 and 4800.
- Host S1350: Top = 4C00 Bot = 4C01
- Host S1351: Top = 4801 Bot = 4800
17. Under Storage, right click the desired Servers subfolder and select Create Server.