Install Guide

Configure VMware hosts to access SC Series arrays with SAS FE ports
18 Dell EMC SC Series Storage with SAS Front-end Support for VMware vSphere | 3027-CD-VM
3. Specify to create 4 fault domains (the maximum number) and click Next.
4. Review the fault domain information. A matching port on each SAS controller is automatically paired
to create each fault domain. Click Next.
Note: SAS FE ports must be assigned to a fault domain before the ports become available to hosts.
5. Allow the wizard to complete and click Finish.
6. Expand the Fault Domains > SAS and click each fault domain to view the port details. The fault
domains and ports will display a status of Down until the SAS cables are connected to host SAS
ports.