Developers Guide

Importing PS Series and MD3 VMware volumes
78 Data Migration from Dell PS Series or PowerVault MD3 to Dell EMC SC Series Storage using Thin Import | 3041-BP-EM
9. To navigate to the software iSCSI initiator for the ESXi server, click Home > Inventory > Hosts and
Clusters. Select the ESXi server in the left pane and select the Configuration tab. In the Hardware
window, select Storage Adapters.
10. Right-click the iSCSI software adapter and select Properties.
11. Select the Static Discovery tab, and locate the Target Name of the PS Series or MD3 volume that
was unmounted (if needed, expand the window to see the entire Target Name). Select the target and
click Remove. Answer Yes to confirm the removal.
12. When the target has been removed, click Close. When prompted to rescan the host bus adapter,
click No. Answering yes will cause the ESXi server to log in to the PS Series or MD3 array again.