White Papers
Table Of Contents
- 1 Introduction
- 2 VMware SRM terminology
- 3 Overview and prerequisites
- 4 Configuring array based replication
- 5 Installation and configuration of VMware SRM
- 6 SRM protection groups
- 7 Recovery plans
- 8 Testing
- 9 Recovery
- 10 Failback
- 11 Considerations for guest iSCSI connected volumes
- 12 Summary
- A Technical support and resources
9 Disaster Recovery with Dell PS Series SANs and VMware vSphere Site Recovery Manager | TR1073
4. On the next screen there are two password fields. The first field is the inbound password. This is the
password that the protected group will give to the recovery group when establishing a connection for
replication. The second field is the outbound obtained. This is the password that the recovery group
expects to receive from the partner. These passwords do not need to be the same, and are set by
individual group administrators. Enter in both passwords and click Next.
5. The next step in the replication configuration wizard is to specify delegated Space. This is space that
is reserved from local free space on the protected group to store inbound replicas from the partner
group. The Dell PS Series SAN supports bi-directional replication as well as many to one replication.
If replicas are not going to be sent to this site from this partner then the value can be left at 0. Choose
the amount of delegated space (the originating storage pool) and click Next.
6. Verify all of the information is correct and click Finish.