White Papers
Table Of Contents
- 1 Introduction
- 2 VMware SRM terminology
- 3 Overview and prerequisites
- 4 Configuring array based replication
- 5 Installation and configuration of VMware SRM
- 6 SRM protection groups
- 7 Recovery plans
- 8 Testing
- 9 Recovery
- 10 Failback
- 11 Considerations for guest iSCSI connected volumes
- 12 Summary
- A Technical support and resources
37 Disaster Recovery with Dell PS Series SANs and VMware vSphere Site Recovery Manager | TR1073
requirements and downtime requirements. Because this is a controlled failback you will have to be able to
dictate when machines return to the original protected site A as well as guarantee their consistency.
Verify the recovery plans by utilizing the test feature of SRM. Make sure everything is configured correctly
before beginning the controlled failback.
10.2.8 Reprotect the Environment
Now that everything is back onto the original protected site A, you can utilize the reprotect option to re-enable
SRM protection from site A to site B. Test recovery plans to verify everything is back and the virtual
environment is once again protected.