White Papers

Using Windows Active Directory For Account Authentication to PS Series Groups 36
 Select Enter Vendor Code, and enter 12740 in the field. This is the vendor code
for EqualLogic, Inc.
 Select Yes, It conforms, then click Configure Attribute.
Figure 19: Vendor-Specific Attribute Information
 The Configure VSA dialog box is displayed (Figure 20).
Figure 20: Configure VSA
 Enter the following information for the EQL-Admin attribute:
o In the Vendor-assigned attribute number field, enter 6.
o In the Attribute format drop-down list, select Decimal.
o In the Attribute value field, enter 0 (for a group administrator).
 Click OK.
 Continue to close windows until you reach the Edit Dial-in Profile screen.
 On the Advanced tab (Figure 21), verify the information is correct, then click OK.