White Papers

Using Windows Active Directory For Account Authentication to PS Series Groups 15
Figure 15: Vendor-Specific Attribute Information
 The Configure VSA dialog box is displayed (Figure 16).
Figure 16: Configure VSA
 Enter the following information for the PS Series group administrator attribute:
o In the Vendor-assigned attribute number field, enter 6
o In the Attribute format drop-down list, select Decimal.
o In the Attribute value field, enter 0 (for a group administrator).
 When finished click OK twice and Close the Add Vendor Specific Attribute
window and verify the information is correct in the Configure Settings screen.
 Refer to Table 1 for optional Vendor Specific Attributes for PS Series arrays.
 To finish the Configure Settings section click on Encryption at the bottom of
the Settings section.
 Uncheck all the boxes except No encryption and click Next. This will allow the
Network Policy to rout through to the RADIUS server.
 Complete the New Network Policy by verifying the setting and clicking Finish.