White Papers

66 Deploying Symantec Backup Exec 2014 with Dell PS Series Arrays | TR1057
B.5 Connecting to a PS Series volume from Windows
The Microsoft iSCSI Initiator enables you to connect a Windows computer to PS Series iSCSI storage
through the server network adapters. Connecting to volumes with the Microsoft iSCSI Initiator will cause
iSCSI SAN disks to appear as if they are locally attached to the server.
1. Launch iSCSI Initiator from Windows.
2. In the Discovery tab, click Discover Portal (Figure 63).
Figure 63 iSCSI Initiator Properties
3. If required, specify the PS Series group that you want to add.
a. In the IP address or DNS name field, enter the IP address or DNS name of the PS Series group
(Figure 64).
b. In the Port field, enter the network port number (default is 3260).
c. To enable CHAP authentication, click Advanced and configure the required settings.
d. Click OK.