White Papers

65 Deploying Symantec Backup Exec 2014 with Dell PS Series Arrays | TR1057
5. To modify settings for a PS Series group, in the PS Group Access window, select the PS group and
configure the following settings:
a. VDS/VSS access: Specify VDS/VSS CHAP credentials
b. Smart Copy access: Specify CHAP credentials
c. PowerShell/SMP Access:
i. Enter the PS group management IP address (this is the group IP address, unless the group
has a management network configured).
ii. Enter the PS group username and password. The user name can be an account configured
on the group or a domain account.
iii. Optionally, check the box to enable Single Sign-On (SSO) to use Active Directory Domain
credentials. To use SSO, the PS Series group must be running a minimum of PS Series
Firmware Version 6.0 and must be configured to allow SSO. For more information on
configuring the PS group for SSO, refer to the Dell EqualLogic Group Manager
Administrator’s Manual at eqlsupport.dell.com (requires login).
6. Click Save to apply the settings to the selected hosts.
Figure 62 Add PS Series group