Install Guide

50 Citrix XenServer with Dell SC Series Storage Configuration and Deployment | 3132-CD-V
7.1.3 Verify multipath status
To view the status of the multipath from the XenCenter GUI, select the new SR from the list of object and
expand the Multpathing dropdown section as shown in Figure 10.
Display multipath status from GUI
To view the status of the multipath from the CLI, use the following command:
mpathutil status
Display multipath status from CLI
Note: If mpathutil status does not show multiple paths as expected, confirm multipathing was enabled as
shown in section 3.4.1.