Install Guide

29 Citrix XenServer with Dell SC Series Storage Configuration and Deployment | 3132-CD-V
4.3.2 Assign NIC functions to the bond using the XenCenter management GUI
To perform these steps using the CLI rather than the XenCenter GUI, see section 4.3.3. Be sure Multipathing
has been enable a shown in section 3.4.1.
1. In the XenCenter management GUI, navigate to the Infrastructure view, drill down through the
objects, select the desired XenServer host, select the Networking tab, and click Configure.
2. Click Add IP address, enter the desired name, select the Network from the drop-down box, enter the
IP address settings for the dedicated iSCSI storage NIC, and click OK.