Install Guide

27 Citrix XenServer with Dell SC Series Storage Configuration and Deployment | 3132-CD-V
4.3.1.2 Creating a NIC bond in a XenServer host participating in a pool
1. From the XenCenter GUI, select the server, click the NIC tab, and click Create Bond.
2. Select the NICs you would like to participate in the bond, select the Bond mode (default is Active-
active), modify the MTU (default is 1500), and click Create.
Note: If Jumbo Frames are to be used, the MTU must be set (as shown in section 4.3.1.1) prior to creating
the bonded interface.