Install Guide

12 Citrix XenServer with Dell SC Series Storage Configuration and Deployment | 3132-CD-V
multipathing requires a restart of the XenServer host and should be enabled before storage is added to the
server. Only use multipathing when there are multiple paths to the storage.
Note: Additional information on multipathing with XenServer hosts can be found in the Citrix XenServer 7.0
Administrator’s Guide, which is available on the Citrix Product Documentation website.
3.4.1 Enabling multipathing in XenCenter
1. Right-click the server in XenCenter and select Enter Maintenance Mode.
2. Right-click the server and select Properties.
3. In the Properties window, select Multipathing.
4. Check the Enable multipathing on this server box and click OK.
5. The server will need to be restarted for multipathing to take effect.