Setup Guide

Determine the Mounting Location
Determine where to mount the SCv360 expansion enclosure in the rack.
1 Identify a location in the rack with 4U of space for the expansion enclosure.
WARNING: If you plan to install the expansion enclosure above the lower 20U
of a rack, use a mechanical lift to avoid injury.
2
If you plan to install the 1U cable management tray below the expansion enclosure,
identify a location in the rack with 5U of space for the expansion enclosure and cable
management tray.
Figure 2. Mounting Location from Front and Back of Rack
1
Location for the clip nuts to
secure the top cover
2 Location for the clip nuts to
secure the expansion enclosure
3 Location for the expansion
enclosure rack rails
4 Location for the 1U cable
management tray rails
SCv360 Expansion Enclosure Hardware Mounting Kit
The SCv360 expansion enclosure ships with the following hardware mounting kits:
Setting Up the Expansion Enclosure
7