Setup Guide

d Make sure the post/catch mechanism is secure and attached to the rack post.
Figure 5. Attach Rail to the Back of the Rack
3 Attach the right rail to the front post of the rack.
a Align the right rail with the lower two U spaces of the 4U mounting location.
b Pull the rail forward, with the alignment pins in the middle holes of the bottom
two U spaces of the 4U mounting location.
An audible click indicates that the rail is secure in the post.
Figure 6. Attach Rail to the Front of the Rack
4 Secure the rail by installing an M5 x 10 mm screw (106-002-452) in the larger of the
two holes at the front of the rail.
Setting Up the Expansion Enclosure
13