Owners Manual

Item Control/Feature Icon Description

7 Recessed power off

button

Not currently used

8 Storage controller

module fault

• Off: No faults

• Steady amber: Firmware has detected an error

• Blinking amber: Storage controller is performing POST

9 Recessed reset button Not currently used

10 Identification LED

• Off: Identification disabled

• Blinking blue (for 15 sec.): Identification is enabled

• Blinking blue (continuously): Storage controller shut down

to the Advanced Configuration and Power Interface (ACPI)

S5 state

11 USB port One USB 3.0 connector

12 Diagnostic LEDs (8) —

• Green LEDs 0–3: Low byte hex POST code

• Green LEDs 4–7: High byte hex POST code

13 Serial port (3.5 mm mini

jack)

Not for customer use

14 Four Mini-SAS High

Density (HD) ports (Slot

1/Port 1, Slot 1/Port 2,

Slot 1/Port 3, and Slot 1/

Port 4)

— Front-end connectivity ports

NOTE: The mini-SAS HD ports are for front-end

connectivity only and cannot be used for back-end

expansion.

15 Mini-SAS port B (Slot 2/

Port 2)

Back-end expansion port B

16 Mini-SAS port A (Slot 2/

Port 1)

Back-end expansion port A

SCv2080 Storage System Cooling Fan Module Features and Indicators

SCv2080 Storage Systems include five cooling fan modules in five interface slots.

Figure 8. SCv2080 Storage System Cooling Fan Module Features and Indicators

About the SCv2080 Storage System