Administrator Guide

Requirement Description

Windows PowerShell Replay Manager 7.7.1 Command Set requires

Windows PowerShell version 2.0 or 3.0.

Replay Manager Ports

This section specifies the ports required for Replay Manager.

Inbound Ports

Replay Manager requires the following inbound ports for the Microsoft Windows server:

Port Function

27444 Used as the listening port for the Replay Manager

Service for Windows. Allows communication

between the Replay Manager Explorer and Replay

Manager Service, as well as communications

between cluster nodes.

29176 Used as the listening port for the Exchange

Verification Service.

NOTE: Port 29129 is used by the Replay Manager Service for Windows to communicate with the

Replay Manager provider. This port should not be opened on the firewall—the communication is

between the local service and the local provider only.

Outbound Ports

Replay Manager requires the following ports to be opened on the host-based firewall for traffic initiated

from the Microsoft Windows server:

Port Function

443 Used to activate a Replay Manager license using

the Internet, and to communicate with the Storage

Center.

3260 Used by the Microsoft iSCSI Software Initiator to

make an iSCSI connection to Storage Center.

IPv6 Support

Replay Manager supports IPv6 addresses for the following connections.

Type Supported Connection(s)

Windows

• Replay Manager Explorer to Replay Manager

Service Windows

• Replay Manager PowerShell snapin to Replay

Manager Service Windows

VMware

• Replay Manager Explorer to Replay Manager

Service VMware (RMSV)