Administrator Guide

4. In the right pane, click Edit Settings. The Modify Time Settings dialog box appears.
5. The time zone is displayed in the Time Zone drop-down menu.
6. To set a time zone, select a time zone from the Time Zone drop-down menu.
7. Click OK.
View the Time
View the current time for the FluidFS cluster.
1. Click the Storage view and select a FluidFS cluster.
2. Click the File System tab.
3. In the File System panel, expand Environment and select Time.
4. In the right pane, click Edit Settings. The Modify Time Settings dialog box appears.
5. The time is displayed in the Time menus.
Set the Time Manually
Manually set the time for the FluidFS cluster if you are not using NTP.
Prerequisite
NTP must be disabled.
Steps
1. Click the Storage view and select a FluidFS cluster.
2. Click the File System tab.
3. In the File System panel, expand Environment and select Time.
4. In the right pane, click Edit Settings. The Modify Time Settings dialog box appears.
5. Clear the Use NTP Servers checkbox.
6. From the Time drop-down boxes, select the date and time.
7. Click OK.
View the NTP Servers
View the current NTP servers for the FluidFS cluster.
1. Click the Storage view and select a FluidFS cluster.
2. Click the File System tab.
3. In the File System panel, expand Environment and select Time.
4. In the right pane, click Edit Settings. The Modify Time Settings dialog box appears.
5. The NTP servers are displayed in the NTP Servers list.
Add or Remove NTP Servers
Add one or more NTP servers with which to synchronize the FluidFS cluster time. Adding multiple NTP servers ensures continued
time synchronization in the event of an NTP server failure. If the FluidFS cluster cannot establish contact with the rst server, it will
attempt to connect to the remaining servers in order. Remove an NTP server if it is no longer available to synchronize the FluidFS
cluster time with.
Prerequisite
NTP must be enabled.
Steps
1. Click the Storage view and select a FluidFS cluster.
2. Click the File System tab.
3. In the File System panel, expand Environment and select Time.
4. In the right pane, click Edit Settings. The Modify Time Settings dialog box appears.
5. Add or remove NTP servers.
518
FluidFS System Management for FS Series Appliances