Deployment Guide

Item Name Icon Description

• Blinking amber: PSU is in programming mode

8 Power socket (2) — Accepts a standard computer power cord.

9 Power switch (2) — Controls power for the storage system. Each PSU has one switch.

SCv2000/SCv2020 Storage System Storage Controller Features and Indicators

The SCv2000/SCv2020 storage system includes up to two storage controllers in two interface slots.

SCv2000/SCv2020 Storage System Storage Controller with Fibre Channel Front-End Ports

The following figures show the features and indicators on a storage controller with Fibre Channel front-end ports.

Figure 8. SCv2000/SCv2020 Storage System Storage Controller with Four 8 Gb Fibre Channel Front-End Ports

Figure 9. SCv2000/SCv2020 Storage System Storage Controller with Two 16 Gb Fibre Channel Front-End Ports

Item

Control/Feature Icon Description

1 Battery status indicator

• Blinking green (on 0.5 sec. / off 1.5 sec.): Battery heartbeat

• Fast blinking green (on 0.5 sec. / off 0.5 sec.): Battery is charging

• Steady green: Battery is ready

2 Battery fault indicator

• Off: No faults

• Blinking amber: Correctable fault detected

• Steady amber: Uncorrectable fault detected; replace battery

3 MGMT port (Slot 3/Port 1) — Ethernet/iSCSI port that is typically used for storage system management and

access to the BMC

NOTE: To use the MGMT port as an iSCSI port for replication to

another Storage Center, a Flex Port license and replication license are

required. To use the MGMT port as a front-end connection to host

servers, a Flex Port license is required.

4 REPL port (Slot 3/Port 2) — Ethernet/iSCSI port that is typically used for replication to another Storage

Center (requires a replication license)

About the SCv2000/SCv2020 Storage System