Users Guide

Table Of Contents
Replay Manager Service for VMware
Replay Manager Service for VMware (RMSV) enables Replay Manger to communicate with VMware vCenter and create consistent
Replays of VMware virtual machines and datastores on a Dell Storage Center.
Conguring RMSV
To allow Replay Manager to communicate with VMware vCenter, RMSV must be congured with information about the VMware vCenter
Server.
Prerequisites
CAUTION: Errors might occur on the VMware ESXi host if multiple instances of RMSV, on multiple CITV virtual appliances, are
congured to communicate with a single VMware vCenter Server. Each instance of RMSV must be congured to communicate
with a dierent VMware vCenter Server.
Deploy CITV and congure the time zone and network settings.
Identify the host name or IP address of the VMware vCenter Server.
Identify the user name and password of a VMware vCenter user with administrator privileges.
Steps
1 Log in to CITV.
2 When the CLI appears, type 4 and press Enter.
3 Type the host name or IP address of the VMware vCenter Server and press Enter.
4 Type the user name of the VMware vCenter user with administrator privileges and press Enter.
5 Type the password of the user with administrator privileges and press Enter.
6 Retype the password and press Enter to conrm the password.
7 Type 11 and press Enter.
RMSV attempts to connect to the VMware vCenter Server. If a Connected successfully message is displayed , continue to
Step 8. If a
Connection to vCenter failed message is displayed, verify the server information and repeat the previous steps.
NOTE
: If a server certicate message is displayed, type y and press Enter to trust the
certicate.
8 Add the VMware vCenter Server to Replay Manager Explorer using the host name or IP address of CITV and the user name and
password of a VMware vCenter user with administrator privileges.
Refer to the Replay Manager Administrator’s Guide for details about adding the VMware vCenter Server to Replay Manager.
NOTE
: Replay Manager management tools (such as Replay Manager Explorer) must be installed on a computer that has
connectivity to the CITV virtual appliance.
Related links
Logging on to CITV
3
18 Replay Manager Service for VMware