Users Guide

Table Of Contents

Install an Update to CITV

Prerequisite

CAUTION: Before updating CITV, make sure that no scheduled backups or restore operations are in progress.

Steps

1 Log in to CITV.

2 St the CLI prompt, type 15 and press Enter. The following options are displayed:

-------------------------------------------

1. Appliance version

2. Check for updates

3. Install update

4. Return to main menu

Enter selection [1 - 4]:

3 Type 3 and press Enter.

• If an update is not found, the following message is displayed:

No available updates found

• If an update is found, the version number of the update is displayed and the update is installed.

4 Press Enter to return to the virtual appliance update menu.

5 Type 16 and press Enter to log out of CITV.

6 When the logon prompt appears, log back in to CITV.

Next step

Check the appliance version after the update completes. On some occasions, the version number is not refreshed. In that case, reboot

CITV. The updated version is then displayed.

When Replay Manager Explorer is installed on a server with Replay Manager Service also installed, Dell recommends that you restart the

Replay Manger Service after the CITV update completes.

NOTE

: Dell recommends that you reboot the CITV appliance after installing an update.