Setup Guide

Back-Panel Port Connectors (per Storage Controller)

Serial connector

NOTE: Not for customer use.

LED Indicators

Front panel

• One two-color LED indicator for system status

• One single-color LED indicator for power status

• Two-digit, seven-segment display indicating the storage

system ID number

• ID button with a single-color LED indicating startup and

pressed states

Hard drive carrier

• One single-color activity LED

• One single-color LED status indicator per drive

Storage controller

• Two single-color LEDs per Ethernet port indicating activity

and link speed

• Four dual-color LEDs per SAS connector indicating port

activity and status

• One single-color LED indicating status

• One single-color LED indicating fault

• One single-color LED for identification

• Eight single-color LEDs for diagnostics

Power supply/

cooling fan

Four LED status indicators for Power Supply status, AC Fail

status, DC Fail status, and Fan Fail status

Power Supplies

AC power supply (per power supply)

Wattage 580 W (maximum wattage: 584 W)

Voltage 100–240 VAC (7.6–3.0 A)

Heat dissipation SCv2000: 65 W at 230 VAC and 99 W at 115 VAC

SCv2020: 65 W at 230 VAC and 99 W at 115 VAC