Administrator Guide

Rediscover an iSCSI Remote Connection
If a remote connection is lost, you can rediscover and reconnect to the external device.
Prerequisites
The external device must be connected to the controller using iSCSI.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of
Unisphere Central.
2. From the
DATA MOBILITY menu, click Imports.
The Imports view is displayed.
3. Click the Connections tab.
4. Click Rediscover iSCSI Remote Connections.
A confirmation dialog box is displayed.
5. Click Yes.
Unisphere identifies external devices connected to the system that allow discovery, and adds them to the Connections
view.
Delete a Remote Connection
Use the Data Mobility menu to remove a remote connection when it is no longer needed.
Prerequisites
The external device must be connected to the controller using iSCSI.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of
Unisphere Central.
2.
From the
DATA MOBILITY menu, click Imports.
The Imports view is displayed.
3. Click the Connections tab.
4. Select the connection to remove.
5. Click Delete iSCSI Remote Connection.
A confirmation dialog box is displayed.
6. Click Yes.
Storage Center Import Requirements
A Storage Center storage system must meet the following requirements to import data from a PS Series storage array.
Component
Requirement
Storage Center Version 7.1 or later
Connectivity iSCSI
Network Low-latency, high-bandwidth
Storage Center Administration 99