Reference Guide

Species the space allocated in blocks by the storage type by which to lter the display.
–spaceused string
Species the space used by the storage type by which to lter the display.
–spaceusedblocks string
Species the space used in blocks by the storage type by which to lter the display.
–txt filename
Species a txt le in which to save output.
–xml filename
Species an xml le in which to save output.
Output
For each storage type, the following information is output to the console in table format.
Output Description
Index Shows the index of the storage type.
Name Shows the name of the storage type.
DiskFolders Shows the name of the disk folder using the storage type.
Redundancy Shows the redundancy setting for the storage type.
PageSize Shows the page size for the storage type.
PageSizeBlocks Shows the page size for the storage type in blocks.
SpaceUsed Shows the used space for the storage type.
SpaceUsedBlocks Shows the used space for the storage type in blocks.
SpaceAllocated Shows the amount of allocated space for the storage type.
SpaceAllocatedBlocks Shows the amount of allocated space for the storage type in blocks.
system restart
Description
Enables an Administrator to restart a Storage Center.
NOTE
: Restarting a controller that has been shut down also requires manual intervention. The power button on the Storage
Center controller must be pressed to restore power.
Format
system restart {options}
Command Reference
67