Support Matrix

NX440 options
These options are available for all NX440 configurations.
Data Drives: Always four HDDs for OS (RAID 5). Drives must all be same speed and capacity.
Second Power Supply: Dual, Hot-plug, Redundant Power Supply (1+1), 350W.
Optical: Internal SATA: DVD+/-RW or DVD ROM
Rack Rail options:
• ReadyRails with Cable Management Arm
• ReadyRails without Cable Management Arm
• ReadyRails Static Rails for 2/4-post Rails
• 1U Combo Drop-in/Stab-in Rails
iDRAC: iDRAC9 Enterprise with OpenManage Essentials
TPM: Trusted Platform Module 1.2 or 2.0
NOTE:
UEFI is currently not supported.
Host Bust Adaptors: Dell SAS 12 Gb HBA
NIC options: Supports up to two half-length cards
• Intel X550 Dual Port 10GbE Base-T (FH or LP)
• Intel X710 Dual Port 10Gb DA/SFP+ (FH or LP)
• Intel I350 Dual Port 1GbE Base-T (FH or LP)
• Intel I350 Quad Port 1GbE Base-T (FH or LP)
• Broadcom 5720 Dual port 1GbE Base-T adapter (FH or LP)
• Broadcom 5719 Quad port 1GbE Base-T adapter (FH or LP)
NX3240 configurations
The NX3240 standard configurations and options are given below.
NX3240 standard configurations
Entry Configuration
Optimal Configuration Performance Configuration
Chassis
Drive capacity
Front bay (Pre-configured to
selected RAID)
12 x 3.5 in. 12 x 3.5 in. 12 x 3.5 in.
Mid bay (require configuration) 4 x 3.5 in. 4 x 3.5 in. 4 x 3.5 in.
Rear bay (OS drives) 2 x 3.5 in. 2 x 3.5 in. 2 x 3.5 in.
PCI card support
PCIe 3.0 (up to three x8 slots) Yes Yes Yes
Hardware
Processor Single: Intel Xeon Bronze
3104 1.7G, 6C/6T, 9.6T/s
2UPI, 8MB Cache, No Turbo,
No HT (85W) DDR4-2133
Dual: Intel Xeon Bronze 3106
1.7G, 8C/8T, 9.6T/s 2UPI, 11MB
Cache, No Turbo, No HT (85W)
DDR4-2133
Dual: Intel® Xeon® Silver 4114
2.2G, 10C/20T, 9.6GT/s 2UPI,
14M Cache, Turbo, HT (85W)
DDR4-2400
Memory 16GB (2 x 8GB DIMMs) 32GB (4 x 8GB DIMMs) 64GB (4 x 16GB DIMMs)
LCD Bezel Yes Yes Yes
Single, Hot-plug Power Supply
(1+0), 750W
Yes Yes Yes
10 System configurations and documents