Setup Guide

ManualsBrandsDell ManualsCompellent (SCStorage NX430

Setting Up Your Dell Storage NX430 Network Attached Storage System

(continued)

4 | Initial conguration

5 | More information

1. WhenyoustartyourNASsystemthatrunsWindowsStorage

Server2012forthersttime,ontheDefault Password page,

click OK.

NOTE: Before changing the password, make sure that

you change the system language according to your

preference.

2. To change your administrator password, press Ctrl+Alt+Del,

and then click Change a Password.

3. To change the default language, navigate to

C:\Dell_OEM\MUI and run the appropriate language batch

le.Completetheon-screeninstructionstoinstallyour

preferred language.

ServerManagerstartsautomaticallywhenyoulogintherst

time.

In Server Manager, click Congurethislocalserver to:

• Change the computer name (if required)

• AddNASsystemtothedomain

• Check for latest Windows updates

• Specifythetimezone

• Configure remote desktop

Dell OpenManage server administration

You can monitor your system remotely using Dell OpenManage Server Administrator. To access Dell OpenManage Server Administrator, connect

tothesecureport,1311,ofyourNASsystem.Forexample,type:

https://D<ServiceTag>:1311

Where

is Service Tag.

To locate the Service Tag of your system, see the section Locating your system Service Tag in this document.

Documentation

For more information, see the following documentation at Dell.com/storagemanuals.

Title Description

Getting Started Guide Placemat Providesanoverviewofsystemfeatures,settingupyoursystem,andtechnicalspecications.Thisdocu-

ment is also shipped with your system.

Owner’s Manual Provides information about system features and describes the process of troubleshooting

the system and installing or replacing system components.

Rack Installation Instructions Describes the process of installing your system into a rack. This document is also shipped with your rack

solution.

Administrator’s Guide Providesinformationaboutconguringandmanagingthesystem.

Troubleshooting Guide Provides information about troubleshooting the software and the system.

Dell OpenManage Server Adminis-

trator User’s Guide

ProvidesinformationaboutusingtheOpenManageServerAdministratortomanageyourDellStorageNAS

system.

NOTE: For any documentation related to Dell OpenManage Server Administrator, go to Dell.com/openmanagemanu-

als.

Documentation feedback

You can rate the documentation or write your feedback on any of our Dell Documentation pages and click Send Feedback to send your feedback.

intellectual property laws.

Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions.

All other marks and names mentioned herein may be trademarks of their respective companies.

Starting remote desktop

NOTE: MakesurethatyouhavecompletedtheInitialCongurationtasksbeforeconnectingtotheNASsystemusingremotedesktop.

• Enable remote desktop using Server Manager or system properties (Control Panel -> System).

• IfDynamicHostConfigurationProtocol(DHCP)andDomainNameSystem(DNS)areimplementedonyournetwork,yoursystemautomaticallyconfiguresthe

networksettings.YoucanstartremotedesktopfromaclientandremotelyaccesstheNASsystemusingthedefaultsystemname.

For example, in the Remote Desktop Connection dialog box, type D<ServiceTag>, where <

ServiceTag

> is the Service Tag.

To locate the Service Tag of your system, see the section Locating your system Service Tag in this document.

NOTE: The default password is Stor@ge!

NOTE: To start a software application, on the taskbar,

click Start, and then click the program name.